Academic, researcher and engineer
Eugenio Oñate was born in Valencia, Spain. He graduated in Civil Engineering from the Universitat Politècnica de València in 1975 and moved to Swansea University, where he completed an MSc (1976) and a PhD (1978) under Professor O. C. Zienkiewicz, one of the founders of the finite element method. He received a second doctorate in Civil Engineering from UPC in 1979.
He joined UPC in Barcelona in 1979 and became Full Professor of Structural and Continuum Mechanics in 1983. From 1983 to 1989 he directed the School of Civil Engineering, overseeing the design and construction of its new buildings on the UPC campus.
In 1987 he founded CIMNE, the International Center for Numerical Methods in Engineering, which he directed until 2022. CIMNE has grown to some 250 scientists and engineers from 25 countries, and its network of CIMNE Classrooms links 30 centres in Spain and Latin America.
His career combines teaching, research in computational mechanics, and the transfer of that research to industry. He has presided over the three main scientific associations in his field: SEMNI, ECCOMAS and IACM.
Numerical methods for engineering problems
His work is driven by multidisciplinary problems in civil, environmental, marine and industrial engineering, especially those where fluids, soils, structures and heat interact.
- Particle Finite Element Method (PFEM)Combining particle, discrete and finite element methods for fluid–structure and fluid–soil–structure interaction, flooding and excavation.
- Critical infrastructure under natural hazardsPredicting the safety and resilience of structures exposed to extreme water forces and other environmental hazards.
- Lightweight and inflatable structuresInflatable elements combined with cables and straps: aircraft hangars, portable bridges, coastal breakwaters.
- Rotation-free plate and shell elementsTriangular elements without rotational degrees of freedom for plates and shells, including composite laminates.
- Stabilised finite element methodsFinite calculus (FIC) formulations for fluids, turbulence and incompressible solids.
- Manufacturing processesSimulation and optimal design of sheet metal forming, casting, forging, rolling and extrusion.
- Fire, melting and burningModelling how objects melt, drip and burn with the PFEM.
- Decision-support systemsDatabases, numerical models, sensors and AI for flood risk, sea spills, urban energy use and biomedicine.
Positions
- Distinguished Senior Researcher, CIMNE
- Emeritus Professor, UPC
- Scientific Director, Severo Ochoa Programme of Excellence at CIMNE
- President, International Association for Computational Mechanics (IACM)
- President, European Community on Computational Methods in Applied Sciences (ECCOMAS)
- Secretary General, IACM
- Vice-President, ECCOMAS
- Director, Department of Structural Mechanics, UPC
- President of the Scientific Council, Supercomputing Center of Catalonia
- Founder and President, Spanish Association for Numerical Methods in Engineering (SEMNI); Honorary President since 2004
- Founder, Director and Vice-President, CIMNE
- Director, School of Civil Engineering, UPC
- Full Professor of Structural and Continuum Mechanics, UPC
Education
- Doctor Ingeniero de Caminos, Canales y Puertos (PhD in Civil Engineering), UPC
- PhD, Swansea University, UK
- MSc, Swansea University, UK
- Ingeniero de Caminos, Canales y Puertos (Civil Engineering), Universitat Politècnica de València
Awards and recognition
Honorary doctorates and fellowships
- 2021Doctor Honoris Causa, Peter the Great St. Petersburg Polytechnic University
- 2013Doctor Honoris Causa, Universidad Central “Marta Abreu” de Las Villas, Cuba
- 2012Doctor Honoris Causa, INSA Lyon, France
- 2007Honorary Fellow, Swansea University
- 2005Honorary Member, Portuguese Association for Theoretical, Applied and Computational Mechanics
- 2000Doctor Honoris Causa, Ovidius University, Constanța, Romania
Academies
- 2025Member, Royal Academy of Engineering of Spain
- 2022Corresponding Member, Cuban Academy of Sciences
- 2006Foreign Member, Istituto Lombardo – Accademia di Scienze e Lettere, Milan
- 1997Member, Royal Academy of Doctors, Barcelona
Selected awards
- 2023Joan Roget Award for Knowledge Transfer, Generalitat de Catalunya
- 2020Ritz–Galerkin Medal, ECCOMAS
- 2011Advanced Grant, European Research Council (ERC); followed by Proof of Concept Grants in 2016 and 2017
- 2010Gauss–Newton Medal, IACM
- 2009Ted Belytschko Applied Mechanics Award, ASME (USA)
- 2009O. C. Zienkiewicz Medal, Polish Association for Computational Mechanics
- 2008Grand Prize, Japan Society for Computational Engineering and Science
- 1996Eric Reissner Medal in Computational Mechanics
- 1990Narcís Monturiol Medal for Research, Generalitat de Catalunya
More awards (20)
- 2023Ícaro Award in Structural Engineering, Civil Engineering School, University of A Coruña
- 2019Ildefonso Cerdá Award, Institute of Civil Engineers of Catalonia
- 2018Award of the Ministry of Science of Cuba for the development of innovative particle methods
- 2013Dr. Luis Federico Leloir Award for International Cooperation in Science, Technology and Innovation, Government of Argentina
- 2009Computational Mechanics Award, Japan Society of Mechanical Engineers
- 2009Literati Award for Excellence, best paper in Engineering Computations
- 2007Award of the Spanish Association for Numerical Methods in Engineering (SEMNI)
- 2004Duran i Farell Award for Excellence in Research and Technology Transfer, UPC
- 2004University of Jyväskylä Medal, Finland
- 2003Award for Excellence, outstanding paper in Engineering Computations
- 2002Highly Commended Award, outstanding paper in Engineering Computations
- 2002City of Barcelona Award for Technological Research
- 2001Medal for Professional Achievement, School of Civil Engineering, UPC
- 2000Award of the Argentinian Association for Computational Mechanics (AMCA)
- 2000Award of the Spanish Group for Fracture Mechanics
- 1999Narcís Monturiol Award, Generalitat de Catalunya
- 1999Accésit, City of Barcelona Award for Technological Research
- 1998Computational Mechanics Award, IACM
- 1998Fellow, IACM
- 1995Medal for Professional Merit, Spanish Institution of Civil Engineers
Books, papers and editorial work
Structural Analysis with the Finite Element Method
Vol. 1: Basis and Solids (Springer, 2009, 500 pp.) · Vol. 2: Beams, Plates and Shells (Springer, 2013, 920 pp.). Also published in Spanish by CIMNE.
Complete list of publications, at the end of this page ↓
Editor-in-chief
He also edits three book series: Lecture Notes on Numerical Methods in Engineering and Sciences and Computational Methods in Applied Sciences (Springer), and Theory and Engineering Applications of Computational Methods (CIMNE).
Teaching and mentoring
From 1979 to 2023 he taught structural analysis by the finite element method at the UPC School of Civil Engineering, and from 1985 to 2012 he directed its Master's programme in Numerical Methods in Engineering.
He has also guided 35 postdoctoral researchers towards permanent careers: 7 are now permanent researchers at CIMNE, 16 hold academic posts in Europe and the US, and 12 work in industry. He currently supervises three PhD theses.
From research to industry
His research has been developed through more than 900 R&D projects with engineering companies in Spain and abroad. He has been principal investigator in 50 European Commission projects (FP4 to FP7 and Horizon 2020) and in some 290 projects funded by industry. He holds four patents, including two on seawater desalination (2014 and 2015).
He has driven the creation of several CIMNE spin-off companies. In 2011 he founded CIMNE Tecnología to bring CIMNE's results to market; it has since created 11 spin-offs of its own.
He is actively promoting the development of the following four spin-offs.
Complete list of publications
435 journal papers, 68 monographs, 69 book chapters and 59 edited books, from 1977 to 2025. Search, or switch between types.
- Taherzadeh-Fard A., Jiménez S., Cornejo A., Oñate E., Barbu LG., Fatigue delamination damage analysis in composite materials through a rule of mixtures approach, Composite Structures, Vol. 351, 118613, 2025 doi:10.1016/j.compstruct.2024.118613
- Bakhshan H., Oñate E., Carbonell J.M., A microstructure-integrated acoustoplastic constitutive model for ultrasonic-assisted machining of Ti6Al4V alloy, CIRP Journal of Manufacturing Science and Technology, Vol. 57, pp. 14-31, 2025 doi:10.1016/j.cirpj.2024.12.007
- Gimenez J.M., Idelsohn S.R., Oñate E., Modeling and simulation of multiphase flow in highly fractured porous media with a data-driven multiscale approach, Computational Mechanics, Vol. 75, pp. 1847–1866, 2025 doi:10.1007/s00466-024-02594-x
- Muñoz-La Rivera F., Mora-Serrano J., Oñate E., Montecinos-Orellana S., A comprehensive framework for integrating extended reality into lifecycle-based construction safety management, Applied Sciences, Vol. 15 (10), 5690, 2025 doi:10.3390/app15105690
- Sigler L., Ubach P.A., Mora J., Oñate E., A review of technologies and challenges for integrated modeling analysis, Archives of Computational Methods in Engineering, Vol. 32, pp. 1733–1762, 2025 doi:10.1007/s11831-024-10187-3
- Rangel R.L.,Gimenez J.M., Oñate E., Franci A., A continuum–discrete multiscale methodology using machine learning for thermal analysis of granular media, Computers and Geotechnics, Vol. 168, Art. Num. 106118, 2024 Open access doi:10.1016/j.compgeo.2024.106118
- Muñoz-La Rivera F., Mora-Serrano J., Oñate E., A critical review of how eXtended Reality (XR) has addressed key factors influencing Safety on Construction Projects (fSCPs), Archives of Computational Methods in Engineering, Vol. 31, pp. 2015–2048, 2024 doi:10.1007/s11831-023-10042-x
- Idelsohn, S.R., Gimenez, J.M., Larreteguy, A.E. et al., The P-DNS method for turbulent fluid flows: An overview, Archives of Computational Methods in Engineering, Vol. 31, pp. 973–1021, 2024 doi:10.1007/s11831-023-10004-3
- Pena J.C., Castro M.A., Muniz de Farias M., Oñate E., Moreno L.A., Recarey C.A., Development of an individual 3D particle reconstruction method for discrete mechanical modeling: Interpolation by Fourier composition, Computer Methods in Applied Mechanics and Engineering, Vol. 420, Art. Num.116705, 2024 doi:10.1016/j.cma.2023.116705
- Cavalcanti D., Mejia C., Roehl D., de-Pouplana I., Oñate E., Hydromechanical embedded finite element for conductive and impermeable strong discontinuities in porous media, Computers and Geotechnics, Vol. 172, 106427, 2024 doi:10.1016/j.compgeo.2024.106427
- Bakhshan H., Carbonell J.M., Oñate E., A modified Johnson–Cook model for the plastic behavior of metals in ultrasonic vibration-assisted upsetting processes, Journal of Manufacturing Processes, Vol. 121, pp. 361-373, 2024 doi:10.1016/j.jmapro.2024.05.027
- Gimenez J.M., Idelsohn S.R., Oñate E., Fast prediction of rain erosion in wind turbine blades using a data-based computational tool, Journal of Hydrodynamics, Vol. 36, 504–518, 2024 doi:10.1007/s42241-024-0044-4
- Cornejo A., Mataix V., Wriggers P. Barbu L., Oñate E., A numerical framework for modelling tire mechanics accounting for composite materials, large strains and frictional contact, Computational Mechanics, Vol. 73 (1), pp. 1-25, 2024 Open access doi:10.1007/s00466-023-02353-4
- Bakhshan, H., Oñate, E. & Carbonell i Puigbó, J.M., A review of the constitutive modelling of metals and alloys in machining process, Archives of Computational Methods in Engineering, Vol. 31(3), pp. 1611-1658, 2024 Open access doi:10.1007/s11831-023-10026-x
- Rangel R.L.,Cornejo A., Oñate E., Franci A., Efficient discrete element modeling of heat generation and transfer in granular flows: Validation and application, Powder Technology, Vol. 439, Art. Num. 119719, 2024 doi:10.1016/j.powtec.2024.119719
- Oñate E., Zárate F., Gimenez J.M., Lohner R., Idelsohn S.R., Fast explicit time integration schemes for parabolic problems in mechanics, International Journal for Numerical Methods in Engineering, Vol. 125 (13), e7477, 2024 Open access doi:10.1002/nme.7477
- Bakhshan H., Oñate E., Carbonell J.M., Modeling of ultrasonic vibration-assisted micromachining using the particle finite element method, Computational Particle Mechanics, Vol. 11, pp. 2267–2290, June 2024 doi:10.1007/s40571-024-00791-2
- Bakhshan H., Oñate E., Carbonell J.M., Microstructure evolution modeling of Ti6Al4V alloy during cutting using the Particle Finite Element Method and homogeneous field distributions, Journal of Manufacturing Processes, Vol. 131, pp. 73-92, 2024 doi:10.1016/j.jmapro.2024.09.011
- Rangel R.L., Franci A., Oñate E., Gimenez J.M., Multiscale data-driven modeling of the thermomechanical behavior of granular media with thermal expansion effects, Computers and Geotechnics, Vol. 176, 106789, 2024 doi:10.1016/j.compgeo.2024.106789
- Muñoz- La Rivera F., Mora J., Oñate E., Virtual reality for the creation of stories and scenarios for construction safety: social distancing in the COVID-19 pandemic context, International Journal of Computational Methods and Experimental Measurements, Vol. 11 (2), pp. 105-114, 2023 Open access doi:10.18280/ijcmem.110205
- Marti J., Oñate E., Enhanced semi-explicit particle finite element method via a modified Strang splitting operator for incompressible flows, Computational Particle Mechanics, Vol. 10, pp. 1463–1475, 2023 doi:10.1007/s40571-022-00522-5
- Rangel R.L., Kisuka F., Hare C., Vivacqua V., Franci A., Oñate E., Wu C.-Y., Experimental investigation of heat generation during granular flow in a rotating drum using infrared thermography, Powder Technology, Vol. 426, 118619, May 2023 Open access doi:10.1016/j.powtec.2023.118619
- Zarate Z., Villette T., Martinez X., Rastellini F., Cendón D., Andrade C, Oñate E., Combination of 3D solid finite elements with rotation-free beam elements for non-linear analysis of fiber reinforced polymer rebars, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 39, (2), 12, 2023 Open access doi:10.23967/j.rimni.2023.05.001
- Rangel R.L., Kisuka F., Hare C., Vivacqua V., Franci A., Oñate E., Wu C.-Y., Dataset of the temperature rise during granular flows in a rotating drum, Data in Brief, Vol. 48, 109282, 2023 doi:10.1016/j.dib.2023.109282
- de-Pouplana I., Latorre S., Masó M., Alonso C. Pérez E., Guinart X., Hernández I., Baulies X., Oñate E., A prototype of a micro-scale model for the distribution of NO2 in urban areas, Atmospheric Pollution Research, Vol. 14 (2), 101668, 2023 doi:10.1016/j.apr.2023.101668
- Valera R.L.R., González J.I., de Oliveira Junior M., Muniz de Farias M., Castro Fuentes M.A., Pena Aguila J., Moreno Anselmi L.A., Recarey Morfa C.A., Oñate E., Development and coupling of numerical techniques for modeling micromechanical discrete and continuous media using real particle morphologies, Computational Particle Mechanics, Vol.10 (1), pp. 121-141, 2023 doi:10.1007/s40571-022-00481-x
- Düsterhöft-Wriggers W., Larese A., Oñate E., Rung T., Assessment of simplified momentum equations for free surface flows through rigid porous media, Experimental and Computational Multiphase Flow, Vol. 5, pp.159–177, 2023 Open access doi:10.1007/s42757-022-0133-y
- González J.M., Marcipar J., Estruch C., Oñate E., Structural analysis and design of a large inflatable hangar for aircrafts, Structural Engineering International, Vol. 33 (3), pp. 473-477, 2023 doi:10.1080/10168664.2022.2064403
- Idelsohn S.R., Gimenez J.M., Larreteguy A., Nigro N.M., Sívori F.M., Oñate E., Multi-scale methods: applications to fluid mechanics problems, Mecánica Computacional, Vol. 40 (1), pp. 9-9, 2023
- Idelsohn S.R., Giménez J.M., Löhner R., Oñate E., A multiscale approach for the study of particle-laden flows using a continuous model, Computer Methods in Applied Mechanics and Engineering, Vol. 401, Part A, 115174, 2022 doi:10.1016/j.cma.2022.115174
- Oñate E., Cornejo A., Zárate F., Kashiyama K., Franci A., Combination of the finite element method and particle-based methods for predicting the failure of reinforced concrete structures under extreme water forces, Engineering Structures, Vol. 251, Part B, 113510, 2022 doi:10.1016/j.engstruct.2021.113510
- Masó M., de-Pouplana I., Oñate E., A FIC-FEM procedure for the shallow water equations over partially wet domains, Computer Methods in Applied Mechanics and Engineering, Vol. 389, 114362, 2022 doi:10.1016/j.cma.2021.114362
- Ryzhakov P., Hermosilla F., Ubach P.-A., Oñate E., Adaptive breakwaters with inflatable elements for coastal protection. Preliminary numerical estimation of their performance, Ocean Engineering, Vol. 251, 110818, 2022 doi:10.1016/j.oceaneng.2022.110818
- Marti J., Schartel B., Oñate E., Simulation of the burning and dripping cables in fire using the particle finite element method, Journal of Fire Sciences, Vol. 40(1), pp. 3-25, 2022 doi:10.1177/07349041211039752
- Muñoz-La Rivera F., Mora-Serrano J., Oñate E., Virtual reality stories for construction training scenarios: the case of social distancing at the construction site, WIT Transactions on The Built Environment, Vol. 205, pp. 37-47, 2022 doi:10.2495/BIM210041
- Löhner R., Antil H., Gimenez J.M., Idelsohn S.R., Oñate E., A deterministic pathogen transmission model based on high-fidelity physics, Computer Methods in Applied Mechanics and Engineering, Vol. 401, Part A, 114929, 2022 doi:10.1016/j.cma.2022.114929
- Oñate E., de-Pouplana I., Zárate F., Explicit time integration scheme with large time steps for first order transient problems using finite increment calculus, Computer Methods in Applied Mechanics and Engineering, Vol. 402, 115332, December 2022 doi:10.1016/j.cma.2022.115332
- Masó M., Franci A., de-Pouplana I., Cornejo A., Oñate E., A Lagrangian–Eulerian procedure for the coupled solution of the Navier–Stokes and shallow water equations for landslide-generated waves, Advanced Modeling and Simulation in Engineering Sciences, Vol. 9(1), Article 15, 2022 doi:10.1186/s40323-022-00225-9
- Casas G., de-Pouplana I., Gandikota R., Oñate E., Numerical simulation of particle impact drilling (PID) systems: a one-way coupled approach, Computational Particle Mechanics, Vol. 9, pp. 735–757, 2022 doi:10.1007/s40571-021-00440-y
- Cornejo A., Jiménez S., Barbu L.G., Oller S., Oñate E., A unified non-linear energy dissipation-based plastic-damage model for cyclic loading, Computer Methods in Applied Mechanics and Engineering, Vol. 400, 115543, October 2022 doi:10.1016/j.cma.2022.115543
- Marti J., Oñate E., An enhanced semi-explicit particle finite element method for incompressible flows, Computational Mechanics, Vol. 70(3), pp. 607–620, 2022 doi:10.1007/s00466-022-02182-x
- Lee Y.X., Ahmad F., Kabir S., Masset P.J., Onate E., Yeoh G.H., Synergistic effects of tubular halloysite clay and zirconium phosphate on thermal behavior of intumescent coating for structural steel, Journal of Materials Research and Technology, Vol. 18, pp. 4456-4469, 2022 doi:10.1016/j.jmrt.2022.04.097
- Muñoz-La Rivera F., Mora-Serrano J., Valero I., Oñate E., Methodological-technological framework for construction 4.0, Archives of Computational Methods in Engineering, Vol. 28, pp. 689–711, 2021 doi:10.1007/s11831-020-09455-9
- Wang L., Zhang X., Zaniboni F., Oñate E., Tinti S., Mathematical Optimization Problems for Particle Finite Element Analysis Applied to 2D Landslide Modeling, Mathematical Geosciences, Vol. 53, pp. 81–103, 2021 doi:10.1007/s11004-019-09837-1
- Cornejo A., Franci A., Zárate F., Oñate E., A fully Lagrangian formulation for fluid-structure interaction problems with free-surface flows and fracturing solids, Computers & Structures, Vol. 250, 106532, 2021 doi:10.1016/j.compstruc.2021.106532
- Meng J., Zhang X., Utili S., Oñate E., A nodal-integration based particle finite element method (N-PFEM) to model cliff recession, Geomorphology, Vol. 381, 107666, 2021 doi:10.1016/j.geomorph.2021.107666
- Giménez J.M., Idelsohn S.R., Oñate E., The P-DNS method applied to the numerical simulation of turbulent multiphase flows, Mecánica Computacional, Vol. 38 (30), 1177-1177, 2021
- Felippa C., Oñate E., Accurate Timoshenko beam elements for linear elastostatics and LPB stability, Archives of Computational Methods in Engineering, Vol. 28, pp. 2021–2080, 2021 doi:10.1007/s11831-020-09515-0
- Puigferrat A., de-Pouplana I., Amato F., Oñate E., Numerical prediction of the distribution of black carbon in a street canyon using a semi-Lagrangian finite element formulation, Building and Environment, Vol. 199, 107910, 2021 doi:10.1016/j.buildenv.2021.107910
- Ali S., Ahmad F., Yusoff P.S.M.M., Muhamad N., Oñate E., Raza M.R., Malik K., A review of graphene reinforced Cu matrix composites for thermal management of smart electronics, Composites Part A: Applied Science and Manufacturing, Vol. 144, 106357, 2021 doi:10.1016/j.compositesa.2021.106357
- Idelsohn S.R., Giménez J.M., Nigro N.M., Oñate E., The Pseudo-Direct Numerical Simulation method for multi-scale problems in mechanics, Computer Methods in Applied Mechanics and Engineering, Vol. 380, 113774, 2021 doi:10.1016/j.cma.2021.113774
- Puigferrat A., Masó M., de-Pouplana I.,Casas G., Oñate E., Semi-Lagrangian formulation for the advection–diffusion–absorption equation, Computer Methods in Applied Mechanics and Engineering, Vol. 380, 113807, 2021 doi:10.1016/j.cma.2021.113807
- Löhner, R., Antil H., Srinivasan A., Idelsohn S., Oñate E., High-fidelity simulation of pathogen propagation, transmission and mitigation in the built environment, Archives of Computational Methods in Engineering, Special Issue: Modeling and Simulation of Infectious Diseases, Vol. 28, pages 4237–4262, 2021 doi:10.1007/s11831-021-09606-6
- Marti J., de la Vega J., Wang De-Yi, Oñate E., Numerical simulation of flame retardant polymers using a combined Eulerian–Lagrangian finite element formulation, Applied Sciences, Vol. 11(13), 5952, 2021 doi:10.3390/app11135952
- Ullah S., Ahmad F., Al-Sehemi A.G., Raza M.R., Assiri M.A., Irfan A., Oñate E., Yeoh G.H., Effects of expandable graphite on char morphology and pyrolysis of epoxy based intumescent fire-retardant coating, Journal of Applied Polymer Science, Vol. 138(41), 51206, 2021 doi:10.1002/app.51206
- Gimenez J.M., Idelsohn S.R., Oñate E., Löhner R., A multiscale approach for the numerical simulation of turbulent flows with droplets, Archives of Computational Methods in Engineering, S.I.: Modeling and Simulation of Infectious Diseases, Vol. 28, pp. 4185–4204, 2021 doi:10.1007/s11831-021-09614-6
- Muñoz-La Rivera F., Mora-Serrano J., Oñate E., Factors Influencing Safety on Construction Projects (fSCPs): Types and categories, Int. J. Environ. Res. Public Health, 18(20), 10884, 2021 doi:10.3390/ijerph182010884
- Franci A., Pouplana de I., Casas G., Celigueta M.A., Gutiérrez J., Oñate E., PFEM-DEM for particle-laden flows with free surfaces, Computational Particle Mechanics, Vol. 7, pp. 101-120, 2020 doi:10.1007/s40571-019-00244-1
- Cremonesi M., Franci, A., Idelsohn S., Oñate E., A State of the Art Review of the Particle Finite Element Method (PFEM), Archives of Computational Methods in Engineering, Vol. 27 (5), 1709-1735, 2020 doi:10.1007/s11831-020-09468-4
- Franci, A., Cremonesi, M., Perego, U., Crosta G., Oñate E., 3D simulation of Vajont disaster. Part 1: Numerical formulation and validation, Engineering Geology, Vol. 279, 105854, 15 pp., 2020 doi:10.1016/j.enggeo.2020.105854
- Franci A., Cremonesi M., Perego U., Oñate E., A Lagrangian nodal integration method for free-surface fluid flows, Computer Methods in Applied Mechanics and Engineering, Vol. 361, 1, 112816, April 2020 doi:10.1016/j.cma.2019.112816
- Puigferrat A., de-Pouplana I., Oñate E., FIC-FEM formulation for the multidimensional transient advection-diffusion-absorption equation, Computer Methods in Applied Mechanics and Engineering, Vol. 365, pp. 112984, June 2020 doi:10.1016/j.cma.2020.112984
- Zorrilla R., Rossi R., Wüchner R, Oñate E., An embedded Finite Element framework for the resolution of strongly coupled Fluid–Structure Interaction problems. Application to volumetric and membrane-like structures, Computer Methods in Applied Mechanics and Engineering, Vol. 368, pp. 113179, August 2020 doi:10.1016/j.cma.2020.113179
- Löhner R., Antil H., Idelsohn S., Oñate E., Detailed simulation of viral propagation in the built environment, Computational Mechanics, Vol. 66, pp. 1093–1107, 2020 doi:10.1007/s00466-020-01881-7
- Cornejo A., Mataix V., Zárate F., Oñate E., Combination of an adaptive remeshing technique with a coupled FEM-DEM approach for analysis of crack propagation problems, Computational Particle Mechanics, Vol. 7, pp. 735–752, 2020 doi:10.1007/s40571-019-00306-4
- Celigueta M.A., Latorre S., Arrufat F., Oñate E., An accurate nonlocal bonded discrete element method for non linear analysis of solids. Application to concrete fracture tests, Computational Particle Mechanics, Vol. 7, 543–553, 2020 doi:10.1007/s40571-019-00278-5
- Carbonell J.M, Rodríguez J.M. Oñate E., Modelling 3D metal cutting problems with the particle finite element method, Computational Mechanics, Vol. 63 (3), pp. 603-624, 2020 doi:10.1007/s00466-020-01867-5
- Franci, A., Cremonesi, M., Perego, U., Oñate E., Crosta G, 3D simulation of Vajont disaster. Part 2: Multi-failure scenarios, Engineering Geology, Vol. 279, 105856, 14 pp., 2020 doi:10.1016/j.enggeo.2020.105854
- Salazar F., San-Mauro, J., Celigueta, M.A., Oñate, E., Shockwaves in spillways with the particle finite element method, Computational Particle Mechanics, Vol. 7 (1), pp. 87-99, 2020 doi:10.1007/s40571-019-00252-1
- Jou O., Celigueta M.A., Latorre S., Arrufat F., Oñate E., A bonded discrete element method for modeling ship–ice interactions in broken and unbroken sea ice fields, Computational Particle Mechanics, Vol. 6 (4), pp 739–765, 2019 doi:10.1007/s40571-019-00259-8
- Arnau P.A., Navarro N., Soraluce J., Martínez-Iglesias J.M., Illas J., Oñate E., Cool Steam method for desalinating seawater, Water, Vol. 11(11), 2385, 2019 doi:10.3390/w11112385
- Ortega E., Flores R., Cuartero E., Oñate E., Efficient aeroelastic analysis of inflatable structures using enhanced potential flow aerodynamics, Journal of Fluids and Structures, Vol. 90, pp. 230-245, 2019 doi:10.1016/j.jfluidstructs.2019.06.013
- Zhang X., Oñate E., Galindo Torres S.A., Bleyer J., Krabbenhoft K., A unified Lagrangian formulation for solid and fluid dynamics and its possibility for modelling submarine landslides and their consequences, Computer Methods in Applied Mechanics and Engineering, Vol. 343, pp. 314-338, 2019 doi:10.1016/j.cma.2018.07.043
- Iaconeta I., Larese A., Rossi R., Oñate E., A stabilized mixed implicit Material Point Method for non-linear incompressible solid mechanics, Computational Mechanics, Vol. 63 (6), pp. 1243–1260, 2019 doi:10.1007/s00466-018-1647-9
- Recarey, C., Pérez, I., Roselló, R., Muniz, M., Hernández, E., Giraldo, R., Oñate, E., Advances in particle packing algorithms for generating the medium in the Discrete Element Method, Computer Methods in Applied Mechanics and Engineering, Vol. 345, pp. 336-362, 2019 doi:10.1016/j.cma.2018.11.011
- Pérez, I., Muniz de Farias, M., Castro, M., Roselló, R., Recarey, C., Medina, L., Oñate, E., Modeling polycrystalline materials with elongated grains, International Journal for Numerical Methods in Engineering, Vol.118 (3), pp. 121-131, 2019 doi:10.1002/nme.6004
- Zárate F., Gómez A. y Oñate E., Ensayos experimentales y numéricos de rotura en piezas de hormigón. Hacia el Laboratorio Virtual, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 35, 14, 2019 doi:10.23967/j.rimni.2019.01.004
- Irazábal J., Salazar F., Santasusana M., Oñate E., Effect of the integration scheme on the rotation of non-spherical particles with the discrete element method, Computational Particle Mechanics, Vol. 6 (4), pp 545–559, 2019 doi:10.1007/s40571-019-00232-5
- Flores R., Ortega E., Ilin A., Simpkins D., Oñate E., An implicit unsteady hydraulic solver for suspended cuttings transport in managed pressure wells, Computational Particle Mechanics, Vol. 6 (2), pp 163–175, 2019 doi:10.1007/s40571-018-0204-9
- Ahmad, F., S. Ullah, N. Haswina bt H. Merican, E. Oñate, A.G.Al-Sehemi, G. Heng Yeoh, An investigation on thermal performance of wollastonite and bentonite reinforced intumescent fire-retardant coating for steel structures, Construction and Building Materials, Vol. 228, 116734, 2019 doi:10.1016/j.conbuildmat.2019.116734
- Cardoso V., Botello S., Zárate F., Oñate E., Finite volume for stress analysis upon polygonal, unstructured and non conforming meshes, Revista Int. Métodos Númericos para Cáluclo y Diseño en Ingeniería, Vol. 35, (4), 47, 2019 doi:10.23967/j.rimni.2019.10.001
- Zárate, F., Oñate, E., Predicción de fracturas en estructuras de hormigón combinando los métodos de elementos finitos y de elementos discretos, Hormigón y Acero, Vol. 69 (S1), pp. 53-69, 2018 doi:10.1016/j.hya.2018.05.002
- Zárate, F., González, J.M., Miquel, J., Löhner, R., Oñate, E., A coupled fluid FEM-DEM technique for predicting blasting operations in tunnels (), Underground Space, Vol. 3 (4), pp. 310-316, 2018 Open access doi:10.1016/j.undsp.2018.09.002
- Zárate F., Cornejo A., Oñate E., A three-dimensional FEM-DEM technique for predicting the evolution of fracture in geomaterials and concrete, Computational Particle Mechanics, Vol. 5(3), pp. 411-420, 2018 doi:10.1007/s40571-017-0178-z
- Recarey C., Pérez Morales I.P., de Farias M.M., Oñate E., Roselló Valera R., Díaz-Guzmán H., General advancing front packing algorithm for the discrete element method, Computational Particle Mechanics, Vol. 5, (1), pp 13–33, 2018 doi:10.1007/s-40571-016-0144-1
- González J.M., F. Zárate, E. Oñate, Pulse fracture simulation in shale rock reservoirs: DEM and FEM–DEM approaches, Computational Particle Mechanics, Vol. 5 (3), pp. 355-373, 2018 doi:10.1007/s40571-017-0174-3
- Recarey C., L.Argüelles, M.M. de Farias, I.P. Pérez, R. Roselló, E. Oñate, Systemic characterization and evaluation of particle packings as initial sets for discrete element simulations, Computational Particle Mechanics, Vol. 5 (3), pp. 319-334, 2018 doi:10.1007/s40571-017-0171-6
- Casas G., Ferrer A., Oñate E., Approximating the Basset force by optimizing the method of van Hinsberg et al., Journal of Computational Physics, Vol. 352, pp. 142-171, 2018 doi:10.1016/j.jcp.2017.09.060
- Pouplana I., Oñate E., Finite element modelling of fracture propagation in saturated media using quasi-zero-thickness interface elements, Computers and Geotechnics, Vol. 96, pp. 103-117, 2018 doi:10.1016/j.compgeo.2017.10.016
- Mataix, V., Flores, F.G., Rossi, R., Oñate, E., Triangular prismatic solid-shell element with generalised deformation description, European Journal of Computational Mechanics, Vol. 27(1), pp. 1-32, 2018 doi:10.1080/17797179.2017.1340013
- Zhang, X., Sloan, S.W., Oñate, E., Dynamic modelling of retrogressive landslides with emphasis on the role of clay sensitivity, Numerical and Analytical Methods in Geomechanics, Vol. 42(15), pp. 1806-1822, 2018 doi:10.1002/nag.2815
- Felippa, C.A., Oñate, E., Idelsohn, S.R., Variational framework for FIC formulations in continuum mechanics: High order tensor-derivative transformations and invariants, Archives of Computational Methods in Engineering, Vol. 25 (4), pp 919–963, 2018 doi:10.1007/s11831-017-9245-0
- Recarey C., de Farias M.M., Pérez Morales I.P., Oñate E., Roselló Valera R., Virtual modeling of polycrystalline structures of materials using particle packing algorithms and Laguerre cells, Computational Particle Mechanics, Vol. 5 (2), pp. 213-226, 2018 doi:10.1007/s40571-017-0164-5
- Löhner, R., Haug, E., Zinggerling, C., Oñate, E., Real-time micro-modelling of city evacuations, Computational Particle Mechanics, Vol. 5 (1), pp. 71-86, 2018 doi:10.1007/s40571-016-0154-z
- Marti, J., Idelsoh, S.R., Oñate, E., A finite element model for the simulation of the UL-94 burning test, Fire Technology, Vol. 54 (6), pp. 1783-1805, 2018 doi:10.1007/s10694-018-0769-0
- Salazar F., Moran R. Toledo M.A., Oñate E., Data-based models for the prediction of dam behaviour: a review and some methodological considerations, Archives of Computational Methods in Engineering, Vol. 24 (1), pp. 1-21, 2017 doi:10.1007/s11831-015-9157-9
- Irazábal J., Salazar F., Oñate E., Numerical modelling of granular materials with spherical discrete particles and the bounded rolling friction model. Application to railway ballast, Computers and Geotechnics, Vol. 85, pp. 220-229, 2017 doi:10.1016/j.compgeo.2016.12.034
- Nallim L.G., Oller S., Oñate E., Flores F.G., A hierarchical finite element for composite laminated beams using a refined zigzag theory, Composite Structures, Vol. 163, pp. 168-184, 2017 doi:10.1016/j.compstruct.2016.12.031
- de Pouplana I., Oñate E., A FIC-based stabilized mixed finite element method with equal order interpolation for solid–pore fluid interaction problems, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 41, pp. 110-134, 2017 doi:10.1002/nag.2550
- Ryzhakov, P., Marti, J., Idelsohn, S., Oñate, E, Fast fluid–structure interaction simulations using a displacement-based finite element model equipped with an explicit streamline integration prediction, Computer Methods in Applied Mechanics and Engineering, Vol. 315, pp. 1080-1097, 2017 doi:10.1016/j.cma.2016.12.003
- Ortega, E., Flores, R., Oñate, E., Idelsohn, S.R., A-posteriori error estimation for the finite point method with applications to compressible flow, Computational Mechanics, Vol. 60 (2), pp. 219-233, 2017 doi:10.1007/s00466-017-1402-7
- Salazar F., Toledo M.A., González J.M., Oñate E., Early detection of anomalies in dam performance: A methodology based on boosted regression trees, Structural Control Health Monitoring, Vol. 24 (11), pp. e2012, 2017 doi:10.1002/stc.2012
- Cotela, J., Rossi, R., Oñate, E., A FIC-based stabilized finite element formulation for turbulent flows, Computer Methods in Applied Mechanics and Engineering, Vol. 315, pp. 607-631, 2017 doi:10.1016/j.cma.2016.11.020
- Ryzhakov P., Oñate E., A finite element model for fluid-structure interaction problems involving closed membranes, internal and external fluids, Computer Methods in Applied Mechanics and Engineering, Vol. 326, pp. 422-445, 2017 doi:10.1016/j.cma.2017.08.014
- Bazilevs, Y., Kamran, K., Moutsanidis, G., Benson, D.J., Oñate, E., A new formulation for air-blast fluid–structure interaction using an immersed approach. Part I: basic methodology and FEM-based simulations, Computational Mechanics, Vol. 60 (1), pp. 83-100, 2017 doi:10.1007/s00466-017-1394-3
- Salazar F., San Mauro J., Celigueta M.A., Oñate E, Air demand estimation in bottom outlets with the particle finite element method. Susqueda Dam case study, Computational Particle Mechanics, Vol. 4 (3), pp. 345-356, 2017 doi:10.1007/s40571-016-0117-4
- Casas G., Mukherjee D., Celigueta MA, Zohdi T., Oñate E., A modular, partitioned, discrete element framework for industrial grain distribution systems with rotation machinery, Computational Particle Mechanics, Vol. 4(2), pp. 181–198, 2017 doi:10.1007/s40571-015-0089-9
- Iaconeta I., Larese A., Rossi R., Oñate E., An implicit material point method applied to granular flows, Procedia Engineering, Vol. 175, pp. 226-232, 2017 doi:10.1016/j.proeng.2017.01.017
- Labra C., Rojek J., Oñate E., Discrete/finite element modelling of rock cutting with a TBM disc cutter, Rock Mechanics and Rock Engineering, Vol. 50, pp. 621-638, 2017 doi:10.1007/s00603-016-1133-7
- Oñate E., Nadukandi P., Miquel J., Accurate FIC-FEM formulation for the multidimensional steady-state advection–diffusion–absorption equation, Comput. Meth. Appl. Mech. Eng., Vol 327, pp. 352-368, 2017 doi:10.1016/j.cma.2017.08.012
- Celigueta M.A., Latorre S., Arrufat F., Oñate E., Accurate modelling of the elastic behavior of a continuum with the Discrete Element Method, Computational Mechanics, Vol. 60 (6), pp. 997-1010, 2017 doi:10.1007/s00466-017-1453-9
- Franci, A., Oñate, E., Carbonell, J.M., Chiumenti, M., PFEM formulation for thermo-coupled FSI analysis. Application to nuclear core melt accident, Computer Methods in Applied Mechanics and Engineering, Vol. 325, pp. 711-732, 2017 doi:10.1016/j.cma.2017.07.028
- Salazar F., Irazábal J., Larese A., Oñate E., Numerical modelling of landslide-generated waves with the particle finite element method (PFEM) and a non-Newtonian flow model, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 40 (6), pp. 809-826, 2016 doi:10.1002/nag.2428
- Franci, A., Oñate, E., Carbonell, J.M., Velocity-based formulations for standard and quasi-incompressible hypoelastic-plastic solids, International Journal for Numerical Methods in Engineering, Vol. 107 (11), pp. 970-990, 2016 doi:10.1002/nme.5205
- Oñate, E., Finite increment calculus (FIC): a framework for deriving enhanced computational methods in mechanics (), Advanced Modeling and Simulation in Engineering Sciences, Vol. 3, 14, 2016 Open access doi:10.1186/s40323-016-0065-9
- Franci, A., Oñate, E., Carbonell, J,M., Unified Lagrangian formulation for solid and fluid mechanics and FSI problems, Computer Methods in Applied Mechanics and Engineering, Vol. 298, pp. 520-547, 2016 doi:10.1016/j.cma.2015.09.023
- Salazar F., Toledo M.A., Oñate E., Suárez B., Interpretation of dam deformation and leakage with boosted regression trees, Engineering Structures, Vol. 119, pp. 230-251, 2016 doi:10.1016/j.engstruct.2016.04.012
- Celigueta M.A., Deshpande K.M., Latorre S., Oñate E., A FEM-DEM technique for studying the motion of particles in non-Newtonian fluids. Application to the transport of drill cuttings in wellbores, Computational Particle Mechanics, Vol. 3 (2), pp. 263-276, 2016 doi:10.1007/s40571-015-0090-3
- Oñate E., Miquel J., Nadukandi P., An accurate FIC-FEM formulation for the 1D advection-diffusion-reaction equation, Computer Methods in Applied Mechanics and Engineering, Vol. 298, pp. 373-406, 2016 doi:10.1016/j.cma.2015.09.022
- de-Pouplana I., Oñate E., Combination of a non-local damage model for quasi-brittle materials with a mesh-adaptive finite element technique, Finite Elements in Analysis and Design, Vol. 112, pp. 26-39, 2016 doi:10.1016/j.finel.2015.12.011
- Ubach P.A., Arrufat F., Ring L., Gandikota R., Zárate F., Oñate E., Application of an enhanced discrete element method to oil and gas drilling processes, Computational Particle Mechanics, Vol. 3 (1), pp, 29–41, 2016 doi:10.1007/s40571-015-0080-5
- Gimenez, J.M., Nigro, N.M., Idelsohn, S.R., Oñate, E., Surface tension problems solved with the particle finite element method using large time-steps, Computers & Structures, Vol. 141, pp. 90-114, 2016 doi:10.1016/j.compfluid.2016.04.026
- Ryzhakov, P.., García-Espinosa, J., Oñate, E., Lagrangian finite element model for the 3D simulation of glass forming processes, Computers & Structures, Vol. 177, pp. 126-140, 2016 doi:10.1016/j.compstruc.2016.09.007
- Santasusana, M., Irazábal, J., Oñate, E., Carbonell, J.M., The double hierarchy method.A parallel 3D contact method for the interaction of spherical particles with rigid FE boundaries using the DEM, Computational Particle Mechanics, Vol. 3 (3), 407-428, 2016 doi:10.1007/s40571-016-0109-4
- Jarauta A., Secanell M., Pons-Prats J., Ryzhakov P., Idelsohn S.R. and Oñate E., A semi-analytical model for droplet dynamics on the GDL surface of a PEFC electrode, International Journal of Hydrogen Energy, Vol. 40(15), pp. 5375-5383, 2015 doi:10.1016/j.ijhydene.2015.01.058
- Oñate E., Zárate F., Miquel J., Santasusana M., Celigueta M.A., Arrufat F., Gandikota R., Valiullin K. and Ring L., A local constitutive model for the discrete element method. Application to geomaterials and concrete, Computational Particle Mechanics, Vol. 2(2), pp. 139-160, 2015 doi:10.1007/s40571-015-0044-9
- Salazar F., Toledo M.A., Morán R. and Oñate E., An empirical comparison of machine learning techniques for dam behaviour modelling, Structural Safety, Vol 56, pp. 9-17, 2015 doi:10.1016/j.strusafe.2015.05.001
- Kouhi M. and Oñate E., An implicit stabilized finite element method for the compressible Navier-Stokes equations using finite calculus, Computational Mechanics, Vol. 56 (1), pp. 113-129, 2015 doi:10.1007/s00466-015-1161-2
- Franci A., Oñate E. and Carbonell, J.M., On the effect of the bulk tangent matrix in partitioned solution schemes for nearly incompressible fluids, International Journal for Numerical Methods in Engineering, Vol. 102 (3-4), pp. 257-277, 2015 doi:10.1002/nme.4839
- Kamran, K, Rossi R. and Oñate E., A locally extended finite element method for the simulation of multi-fluid flows using the Particle Level Set method, Computer Methods in Applied Mechanics and Engineering, Vol. 294, pp. 1-18, 2015 doi:10.1016/j.cma.2015.05.017
- Di Capua D. and Oñate E., Two-noded zigzag beam element accounting for shear effects based on an extended Euler Bernoulli theory, Composite Structures, Vol. 132, pp 1192-1205, 2015 doi:10.1016/j.compstruct.2015.07.031
- Soudah E., Rudenick P., Bordone M., Bijnens B., Garcia-Dorado D., Evangelista A. and Oñate E., Validation of numerical flow simulations against in vitro phantom measurements in different type B aortic dissection scenarios, Comput Methods Biomech Biomed Engin., Vol. 18(8), pp. 805-15, 2015 doi:10.1080/10255842.2013.847095
- Kempel F., Schartel B., Marti J.M., Burlter K.M., Rossi R., Idelsohn S.R., Oñate E., Hofmann A., Modelling the vertical UL 94 test: competition and collaboration between melt dripping, gasification and combustion, Fire and Materials, an International Journal (FAM), Vol. 39 (6), pp. 570–584, 2015 doi:10.1002/fam.2257
- Larese A., Rossi R., Oñate E., Toledo M.A., Morán R. and Campos H., Numerical and experimental study of overtopping and failure of rockfill dams, International Journal of Geomechanics (ASCE), Vol 15 (4), 2015, pp. 04014060-1-23, 2015 doi:10.1061/(ASCE)GM.1943-5622.0000345
- Feng C., Li S-h. and Oñate E., 2D particle contact-based meshfree method in CDEM and its application in geotechnical problems, Engineering Computations, Vol. 32 (4), pp. 1080-1103, 2015 doi:10.1108/EC-04-2014-0095
- Becker P., Idelsohn S. and Oñate E., A unified monolithic approach for multi-fluid flows and fluid–structure interaction using the Particle Finite Element Method with fixed mesh, Computational Mechanics, Vol. 55 (6), pp. 1091-1104, 2015 doi:10.1007/s00466-014-1107-0
- García-Espinosa J., Di Capua D., Serván B., Ubach P.A. and Oñate E., A FEM fluid-structure interaction algorithm for analysis of the seal dynamics of a surface-effect ship, Computer Methods in Applied Mechanics and Engineering, Vol. 295, pp. 290-304, 2015 doi:10.1016/j.cma.2015.07.010
- Nadukandi P. and Oñate E., Numerically stable formulas for a particle-based explicit exponential integrator, Computational Mechanics, Vol. 55 (5), pp. 903-920, 2015 doi:10.1007/s00466-015-1142-5
- Idelsohn S.R., Oñate E., Nigro N., Becker P. and Gimenez J., Lagrangian versus Eulerian integration errors, Computer Methods in Applied Mechanics and Engineering, Vol. 293, pp. 191-206, 2015 doi:10.1016/j.cma.2015.04.003
- Zárate F. and Oñate E., A simple FEM-DEM technique for fracture prediction in materials and structures, Computational Particle Mechanics, Vol. 2 (3), pp. 301-314, 2015 doi:10.1007/s40571-015-0067-2
- Kouhi M., Oñate E. and Mavriplis, D., Adjoint-based adaptive finite element method for the compressible Euler equations using finite calculus, Aerospace Science and Technology, Vol. 46, pp. 422-435, 2015 doi:10.1016/j.ast.2015.08.008
- Larese A., Rossi R. and Oñate E., Finite element modeling of free surface flow in variable porosity media, Archives of Computational Methods in Engineering, Vol. 22 (4), pp. 637-653, 2015 doi:10.1007/s11831-014-9140-x
- García-Espinosa J., Serván B., Di Capua D., Ubach P.A. and Oñate E., Avances en el desarrollo de un modelo de elementos finitos para la evaluación de un buque de efecto superficie, Revista de Ingeniería Naval, Vol. 922, pp. 68-73, 2014
- Flores R., Ortega E. Oñate E., Simple and efficient numerical tools for the analysis of parachutes, Engineering Computations, Vol. 31 (5), pp. 957-985, 2014 doi:10.1108/EC-10-2012-0247
- Oñate E., Franci A., Carbonell J.M., A particle finite element method for analysis of industrial forming processes, Computational Mechanics, Vol. 54 (1), pp. 85-107, 2014 doi:10.1007/s00466-014-1016-2
- Oñate E., Celigueta M.A., Latorre S., Casas G., Rossi R., Rojek J., Lagrangian analysis of multiscale particulate flows with the particle finite element method, Computational Particle Mechanics, Vol. 1, pp. 85-102, 2014 doi:10.1007/s40571-014-0012-9
- Ortega E.,Oñate E., Idelsohn S. and Flores R., Comparative accuracy and performance assessment of the finite point method in compressible flow problems, Computers and Fluids, Vol. 89, pp. 53-65, 2014 doi:10.1016/j.compfluid.2013.10.024
- Ortega E., Oñate E., Idelsohn S. and Flores R., Application of the finite point method to high-Reynolds number compressible flow problems, International Journal for Numerical Methods in Fluids, Vol. 74 (10), pp. 732-748, 2014 doi:10.1002/fld.3871
- Idelsohn S.R., Marti J., Becker P. and Oñate E., Analysis of multifluid flows with large time steps using the particle finite element method, Int. Journal for Numerical Methods in Fluids, Vol. 75, pp. 621-644, 2014 doi:10.1002/fld.3908
- Kouhi M. and Oñate E., A stabilized finite element formulation for high-speed inviscid compressible flows using finite calculus, International Journal for Numerical Methods in Fluids, Vol. 74 (2), pp. 872-897, 2014 doi:10.1002/fld.3877
- Oñate E., Franci A. and Carbonell J.M., Lagrangian formulation for finite element analysis of quasi-incompressible fluids with reduced mass losses, International Journal for Numerical Methods in Fluids, Vol. 74, pp. 699-731, 2014 doi:10.1002/fld.3870
- Buachart Ch., Kanok-Nukulchai W., Ortega E. and Oñate E., A shallow water model by finite point method, International Journal of Computational Methods, Vol. 11 (1), 1350047, 2014 doi:10.1142/S0219876213500473
- Kouhi M., Dehghan Manshadi M. and Oñate E., Geometry optimization of the diffuser for the supersonic wind tunnel using genetic algorithm and adaptive mesh refinement technique, Aerospace Science and Technology, Vol. 36, pp. 64-74, 2014 doi:10.1016/j.ast.2014.03.014
- Soudah E., Rossi R., Idelsohn S. and Oñate E., A reduced-order model based on the coupled 1D-3D finite element simulations for an efficient analysis of hemodynamics problems, Computational Mechanics, Vol. 54 (4), pp. 1013-1022, 2014 doi:10.1007/s00466-014-1040-2
- Ryzhakov P., Cotela J., Rossi R. and Onate, E., A two-step monolithic method for the efficient simulation of incompressible flows, International Journal for Numerical Methods in Fluids, Vol 74 (12), pp. 919-934, 2014 doi:10.1002/fld.3881
- Oñate E., Nadukandi P. and Idelsohn S., P1/P0+ elements for incompressible flows with discontinuous material properties, Computer Methods in Applied Mechanics and Engineering, Vol. 271, pp. 185-209, 2014 doi:10.1016/j.cma.2013.12.009
- Eijo A., Oñate E. and Oller S., Delamination in laminated plates using the 4-noded quadrilateral qlrz plate element based on the refined zigzag theory, Composite Structures, Vol. 108, pp. 456-471, 2014 doi:10.1016/j.compstruct.2013.09.052
- Vargas P.E., Oñate E., Oller S., Formulación de elementos finitos para vigas de sección abierta formadas por laminados compuestos incluyendo las deformaciones tangenciales por cortante y torsión, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 30 (4), pp. 238-246, 2014 doi:10.1016/j.rimni.2013.07.007
- Oñate E. and Carbonell J.M., Updated Lagrangian mixed finite element formulation for quasi and fully incompressible fluids, Computational Mechanics, Vol. 54 (6), p. 1583-1596, 2014 doi:10.1007/s00466-014-1078-1
- Norachan P., Kim K.-D., Oñate E., Analysis of segmentally constructed prestressed concrete bridges using hexahedral elements with realistic tendon profiles, Journal of Structural Engineering (ASCE), Vol. 140 (6), pp. 04014028-1-17, 2014 doi:10.1061/(ASCE)ST.1943-541X.0000923
- Eijo A., Oñate E. and Oller S., A numerical model of delamination in composite laminated beams using the LRZ beam element based on the refined zigzag theory, Composite Structures, Vol. 104, pp. 270-280, 2013 doi:10.1016/j.compstruct.2013.04.035
- Oñate E., Marti J., Ryzhakov P., Rossi R. and Idelsohn S., Analysis of the melting, burning and flame spread of polymers with the particle finite element method, Computer Assisted Methods in Engineering and Science, Vol. 20, pp. 165–184, 2013 doi:10.1002/nme.2731
- Eijo, A., Oñate E. and Oller S., A four-noded quadrilateral element for composite laminated plates/shells using the refined zigzag theory, International Journal for Numerical Methods in Engineering, Vol. 95, pp. 631-660, 2013 doi:10.1002/nme.4503
- Kamran K., Rossi R. and Oñate E., A compressible Lagrangian framework for modeling the fluid–structure interaction in the underwater implosion of an aluminum cylinder, Mathematical Models and Methods in Applied Sciences (M3AS), Vol. 23 (2), pp. 339-367, 2013 doi:10.1142/S021820251340006X
- Lee D.S., Morillo C., Oller S., Bugeda G. and Oñate E., Robust design optimisation of advance hybrid (fiber-metal) composite structures, Composite Structures, Vol. 99, pp. 181-192, 2013 doi:10.1016/j.compstruct.2012.11.033
- Kouhi M., Lee D.S., Bugeda G. and Oñate E., Multi-objective aerodynamic shape optimization using MOGA coupled to advanced adaptive mesh refinement, Computers and Fluids, Vol. 88, pp. 298-312, 2013 doi:10.1016/j.compfluid.2013.08.015
- Dadvand P., Rossi, R., Gil M., Martorell X., Cotela J. Juanpere E., Idelsohn S. and Oñate E., Migration of a generic multi-physics framework to HPC environments, Computers and Fluids, Vol. 80 (SI), pp. 301-309, 2013 doi:10.1016/j.compfluid.2012.02.004
- Kamran K., Rossi R., Oñate E. and Idelsohn S., A compressible Lagrangian framework for the simulation of the underwater implosion of large air bubbles, Computer Methods in Applied Mechanics and Engineering, Vol. 255, pp. 210-225, 2013 doi:10.1016/j.cma.2012.11.018
- Salazar F., Morán R., Rossi R. and Oñate E., Analysis of the discharge capacity of radial-gated spillways using CFD and ANN - Oliana Dam case study, Journal of Hydraulic Research, Vol. 51 (3), pp. 244-252, 2013 doi:10.1080/00221686.2012.755714
- Carbonell J.Mª. and Oñate E., Modelling of tunnelling processes and rock cutting tool wear with the Particle Finite Element Method, Computational Mechanics, Vol. 52 (3), pp. 607-629, 2013 doi:10.1007/s00466-013-0835-x
- Ryzhakov P., Rossi, R., Viña A. and Oñate E., Modelling and simulation of the sea-landing of aerial vehicles using the Particle Finite Element Method, Ocean Engineering, Vol. 66, pp. 92-100, 2013 doi:10.1016/j.oceaneng.2013.03.015
- Kamran K., Rossi R. and Oñate E., A contact algorithm for shell problems via Delaunay-based meshing of the contact domain, Computational Mechanics, Vol. 52 (1), pp. 1-16, 2013 doi:10.1007/s00466-012-0791-x
- Rossi, R., Larese de Tetto A., Dadvand P. and Oñate E., An efficient edge-based level set finite element method for free surface flow problems, International Journal for Numerical Methods in Fluids, Vol. 71 (6), pp. 687-716, 2013 doi:10.1002/fld.3680
- Lee D.S., Bugeda G., Periaux J. and Oñate E., Robust active shock control bump design optimisation using hybrid parallel MOGA, Computers and Fluids, Vol. 80, pp. 214-224, 2013 doi:10.1016/j.compfluid.2012.03.011
- García-Espinosa J., Serván B., Di Capua D., Ubach de Fuentes P.A and Oñate E., Advances in the development of a FEM model for evaluation of a Surface-Effect Ship (SES) including skirt dynamics, Revista Ingeniería Naval, Vol. 1 (920), pp. 86-91, 2013
- Ortega E., Flores R., Idelsohn S. and Oñate E., A meshless finite point method for three-dimensional analysis of compressible flow problems involving moving boundaries and adaptivity, International Journal for Numerical Methods in Fluids, Vol. 73 (4), pp. 323-343, 2013 doi:10.1002/fld.3799
- Ryzhakov P., Oñate E., Rossi R. and Idelsohn S., Improving mass conservation in simulation of incompressible flows, Int. Journal for Numerical Methods in Engineering, Vol. 90 (12), pp. 1435-1451, 2012 doi:10.1002/nme.3370
- Salazar F., Oñate E. y Morán R., Modelación numérica del deslizamiento de ladera de embalses mediante el Método de Partículas y Elementos Finitos (PFEM), Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 28 (2), pp. 112-123, 2012 doi:10.1016/j.rimni.2012.03.004
- Rojek J., Labra C., Su O. and Oñate E., Comparative study of different discrete element models and evaluation of equivalent micromechanical parameters, International Journal of Solids and Structures, Vol 49 (13), pp. 1497-1517, 2012 doi:10.1016/j.ijsolstr.2012.02.032
- Pons-Prats J., Bugeda G., Zárate F. y Oñate E., Optimización robusta en aplicaciones aeronáuticas con la combinación de cálculo estocástico y algoritmos evolutivos, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 28 (1), pp. 18-32, 2012 doi:10.1016/j.rimni.2011.11.001
- Ródenas J.J., Bugeda G., Albelda J.,Oñate E., y Nadal E., Sobre la necesidad de controlar el error de discretización de elementos finitos en optimización de forma estructural con algoritmos evolutivos, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 28 (1), pp. 1-11, 2012 doi:10.1016/j.rimni.2011.11.005
- Zárate F. and Oñate E., Extended rotation-free shell triangles with transverse shear deformation effects, Computational Mechanics, Vol. 49 (4), pp. 487-503, 2012 doi:10.1007/s00466-011-0653-y
- Nadukandi P., Oñate E. and García Espinosa J., A Petrov–Galerkin formulation for the alpha interpolation of FEM and FDM stencils. Applications to the Helmholtz equation, Int. Journal for Numerical Methods in Engineering, Vol. 89 (11), pp. 1367-1391, 2012 doi:10.1002/nme.3291
- Idelsohn S. R., Nigro N., Limache A. and Oñate E., Large time-step explicit integration method for solving problems with dominant convection, Computer Methods in Applied Mechanics and Engineering, Vol. 217-220, pp. 168-185, 2012 doi:10.1016/j.cma.2011.12.008
- Eijo A., Oller S. and Oñate E., Simple and accurate two-noded beam element for composite laminated beams using a refined zigzag theory, Computer Methods in Applied Mechanics and Engineering, Vol. 213-216, pp. 362-382, 2012 doi:10.1016/j.cma.2011.11.023
- Lee D.S., Morillo C., Bugeda G., Oller S. and Oñate E., Multilayered composite structure design optimisation using distributed/parallel multi-objective evolutionary algorithms, Composite Structures, Vol. 94 (3), pp. 1087-1096, 2012 doi:10.1016/j.compstruct.2011.10.009
- Lee D.S., Periaux J., Gonzalez L.F., Srinivas K. and Oñate E., Robust multidisciplinary unmanned aerial system design optimisation, International Journal of Structural and Multidisciplinary Optimization, Vol. 45 (3), pp. 433-450, 2012 doi:10.1007/s00158-011-0705-0
- Nadukandi P., Oñate E. and García J., A high-resolution Petrov-Galerkin method for the convection-diffusion-reaction problem. Part II-A multidimensional extension, Computer Methods in Applied Mechanics and Engineering, Vol. 213-216, pp. 327-352, 2012 doi:10.1016/j.cma.2011.10.003
- Geyer A., De Mier Torrecilla M., Philips J.C., Idelsohn S. and Oñate E., Flow behaviour of negatively buoyant jets in immiscible ambient fluid, Experiments in Fluids, Vol. 52 (1), 261-271, 2012 doi:10.1007/s00348-011-1217-9
- Larese de Tetto A., Rossi R.,Oñate E. and Idelsohn S., A coupled PFEM-Eulerian approach for the solution of porous FSI problems, Computational Mechanics, Vol. 50 (6), 805-819, 2012 doi:10.1007/s00466-012-0768-9
- Ryzhakov P., Rossi R. and Oñate E., An algorithm for the simulation of thermally coupled low speed flow problems, International Journal for Numerical Methods in Fluids, Vol. 70 (1), pp. 1–19, 2012 doi:10.1002/fld.2674
- Marti J., Ryzhakov P., Idelsohn S. and Oñate E., Combined Eulerian-PFEM approach for analysis of polymers in fire situations, International Journal for Numerical Methods in Engineering, Vol. 92 (9), pp. 782-801, 2012 doi:10.1002/nme.4357
- Mier-Torrecilla M., Geyer A., Phillips J., Idelsohn S. and Oñate E., Numerical simulations of negatively buoyant jets in an immiscible fluid using the Particle Finite Element Method, Journal of Fluid Mechanics, Vol. 69 (5), pp. 1016-1030, 2012 doi:10.1002/fld.2628
- Rojek J., Ońate E., Labra C. and Kargl H., Discrete element simulation of rock cutting, International Journal of Rock Mechanics and Mining Sciences, Vol. 48 (6), pp. 996-1010, 2011 doi:10.1016/j.ijrmms.2011.06.003
- Mier-Torrecilla M., Idelsohn S. and Oñate E., Advances in the simulation of multi-fluid flows with the particle finite element method. Application to bubble dynamics, International Journal for Numerical Methods in Fluids, Vol. 67 (11), pp. 1516-1539, 2011 doi:10.1002/fld.2429
- Martínez X., Rastellini F., Oller S., Flores F. and Oñate E., Computationally optimized formulation for the simulation of composite materials and delamination failures, Composites Part B: Engineering, Vol. 42 (2), pp. 134-144, 2011 doi:10.1016/j.compositesb.2010.09.013
- Oñate, E., Nadukandi, P., Idelsohn, S.R., García, J. and Felippa, C., A family of residual-based stabilized finite element methods for Stokes flows, International Journal for Numerical Methods in Fluids, Vol. 65 (1-3), pp. 106–134, 2011 doi:10.1002/fld.2468
- Oñate E., Idelsohn S. R. and Felippa C. A., Consistent pressure Laplacian stabilization for incompressible continua via higher order finite calculus, Int. Journal for Numerical Methods in Engineering, Vol. 87 (1-5), 171–195, 2011 doi:10.1002/nme.3021
- Oñate E., Celigueta M.A., Idelsohn S.R., Salazar F. and Suárez B., Possibilities of the Particle Finite Element method for fluid-soil-structure interaction problems, Computational Mechanics, Vol. 48 (3), pp. 307-318, 2011 doi:10.1007/s00466-011-0617-2
- Lee D.S., Periaux J., Gonzalez L.F, Oñate E. and Quin N., Active transonic aerofoil design optimization using robust multiobjective evolutionary algorithms, Journal of Aircraft, Vol. 48 (3), 1084-1094, 2011 doi:10.2514/1.C031237
- Pons-Prats J., Bugeda G., Zárate F. and Oñate E., Robust design optimization in aeronautics using stochastic analysis and evolutionary algorithms, Journal of Aerospace Engineering, Vol. 225, (10), pp. 1131-1151, 2011 doi:10.1177/0954410011412131
- Ortega E., Oñate E., Idelsohn S. and Buachart C., An adaptive finite point method for the shallow water equations, Int. Journal for Numerial Methods in Engineering, Vol. 88, pp. 180-204, 2011 doi:10.1002/nme.3171
- Nadukandi P., Oñate E. and Garcia Espinosa J., A fourth-order compact scheme for the Helmholtz equation: Alpha-interpolation of FEM and FDM stencils, Int. Journal for Numerical Methods in Engineering, Vol. 86 (1), pp. 18-46, 2011 doi:10.1002/nme.3043
- Ródenas J.J., Bugeda G., Albelda J. and Oñate E., On the need for the use of error-controlled finite element analyses in structural shape optimization processes, Int. Journal for Numerical Methods in Engineering, Vol. 87 (11), 1105-1126, 2011 doi:10.1002/nme.3155
- Lee D.S., Gonzalez L.F., Periaux J., Srinivas K. and Oñate E., Hybrid-game strategies for multi-objective design optimization in engineering, Computers & Fluids, Vol. 47 (1), 189-204, 2011 doi:10.1016/j.compfluid.2011.03.007
- R. Flores, E. Ortega, E. Oñate, PUMI: un código explícito no estructurado para resolver las ecuaciones de Euler, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 27, 129-145, 2011
- F. Flores, E. Oñate, Wrinkling and folding analysis of elastic membranes using an enhanced rotation-free thin shell triangular element, Finite Elements in Analysis and Design, Vol. 47 (9), 982-990, 2011 doi:10.1016/j.finel.2011.03.014
- Rossi R., Idelsohn S., Oñate E., Cotela J. y Del Pin F., Mejora de la solución fuertemente acoplada de problemas FSI mediante una aproximación de la matriz tangente de presión, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol 27 (3), 165-179, 2011 doi:10.1016/j.rimni.2011.07.006
- Flores F. y Oñate E., A solid finite element with an improvement in the transverse shear behavior for shell analysis, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 27 (4), pp. 258-268, 2011 doi:10.1016/j.rimni.2011.08.005
- Oñate E. and Zárate F., Extended rotation-free plate and beam elements with shear deformation effects, Int. Journal for Numerical Methods in Engineering, Vol. 83 (2), pp.196-227, 2010 doi:10.1002/nme.2836
- Nadukandi P., Oñate E. and García J., A high-resolution Petrov-Galerkin method for the 1D convection-diffusion-reaction problem, Computer Methods in Applied Mechanics and Engineering, Vol. 199 (9-12), pp. 525-546, 2010 doi:10.1016/j.cma.2009.10.009
- Carbonell J.M., Oñate E. and Suárez B., Modeling of ground excavation with the particle finite element method, Journal of Engineering Mechanics, ASCE, Vol. 136 (4), pp. 455-463, 2010 doi:10.1061/(ASCE)EM.1943-7889.0000086
- Idelsohn S.R., Mier-Torrecilla M., Nigro N. and Oñate E., On the analysis of heterogeneous fluids with jumps in the viscosity using a discontinuous pressure field, Computational Mechanics, Vol. 46 (1), pp. 115-124, 2010 doi:10.1007/s00466-009-0448-6
- Flores R., Ortega E. and Oñate E., Numerical investigation of wind tunnel model deformations caused by the twin-sting support system, Journal of Aircraft, Vol. 47 (2), pp. 708-714, 2010 doi:10.2514/1.45272
- Dadvand P., Rossi R. and Oñate E., An object oriented environment for developing finite element codes for multi-disciplinary applications, Archives of Computational Methods in Engineering, Vol. 17 (3), pp 253-297, 2010 doi:10.1007/s11831-010-9045-2
- Rossi R. and Oñate E., Analysis of some partitioned algorithms for fluid-structure interaction, Engineering Computations, Vol. 27 (1), pp. 20-56, 2010 doi:10.1108/02644401011008513
- Idelsohn S. R. and Oñate E., The challenge of mass conservation in the solution of free-surface flows with the fractional-step method: Problems and solutions, International Journal for Numerical Methods in Biomedical Engineering, Vol. 26 (10), pp. 1313-1330, 2010 doi:10.1002/cnm.1216
- Ryzhakov P.B., Rossi R., Idelsohn S.R. and Oñate E., A monolithic Lagrangian approach for fluid-structure interaction problems, Computational Mechanics, Vol. 46 (6), pp. 883-899, 2010 doi:10.1007/s00466-010-0522-0
- Ubach de Fuentes, P.A. and E. Oñate, New rotation-free finite element shell triangle accurately using geometrical data, Computer Methods in Applied Mechanics and Engineering, Vol. 199 (5-8), pp 383-391, 2010 doi:10.1016/j.cma.2009.01.006
- Löhner R. and Oñate E., Advancing front techniques for filling space with arbitrary separated objects, Finite Elements in Analysis and Design, Vol. 46 (1-2), pp 140-151, 2010 doi:10.1016/j.finel.2009.06.032
- Tang Z., Périaux J., Bugeda G. and Oñate E., Lift maximization with uncertainties for the optimization of high lift devices, Int. Journal for Numerical Methods in Fluids, Vol. 64 (2), pp. 119-135, 2010 doi:10.1002/fld.2130
- Oñate E., Rossi R., Idelsohn S.R. and Butler K.M., Melting and spread of polymers in fire with the particle finite element method, International Journal for Numerical Methods in Engineering, Vol. 81 (8), 1046-1072, 2010 doi:10.1002/nme.2731
- Löhner R. and E. Oñate, An advancing front technique for filling space with arbitrary separated objects, Int. Journal for Numerical Methods in Engineering, Vol. 78 (13), pp. 1618 - 1630, 2009 doi:10.1002/nme.2548
- Valdés J.G., Miquel J. and E. Oñate, Nonlinear finite element analysis of orthotropic and prestressed membrane structures, Finite Element in Analysis and Design, Vol. 45 (6-7), pp. 395 - 405, 2009 doi:10.1016/j.finel.2008.11.008
- Idelsohn S., Mier-Torrecilla M. and E. Oñate, Multi-fluid flows with the Particle Finite Element Method, Computer Methods in Applied Mechanics and Engineering, Vol. 198 (33-36), pp. 2750- 2767, 2009 doi:10.1016/j.cma.2009.04.002
- Chacón R., Guzmán F., Mirambell E, Real E. and Oñate E., Wireless sensor networks for strain monitoring during steel bridges launching, Structural Health Monitoring, Vol. 8 (3), pp. 195-205, 2009 doi:10.1177/1475921708100779
- Ortega E., Oñate E. and Idelsohn S., A finite point method for adaptive-three-dimensional compressible flow calculations, International Journal for Numerical Methods in Fluids, Vol 60 (9), pp. 937-971, 2009 doi:10.1002/fld.1892
- Kleiber M. and Oñate E., Olgierd Cecil Zienkiewicz Obituary, Archives of Computational Methods in Engineering, Vol. 16, pp 465, 2009
- Labra C. and Oñate E., High-density sphere packing for discrete element method simulations, Communications in Numerical Methods in Engineering, Vol. 25 (7), pp. 837-849, 2009 doi:10.1002/cnm.1193
- Valdés J. G. and Oñate E., Orthotropic rotation-free basic thin shell triangle, Computational Mechanics, Vol. 44 (3), pp. 363-375, 2009 doi:10.1007/s00466-009-0370-y
- Di Capua D., Oñate E. y Marí A., Modelo higro-termo-mecánico para el hormigón expuesto al fuego, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 25 (4), pp. 359-393, 2009
- Idelsohn S.R., del Pin F., Rossi R. and Oñate E., Fluid-structure interaction problems with strong added-mass effect, Int. Journal for Numerical Methods in Engineering, Vol. 80 (10), pp 1261 - 1294, 2009 doi:10.1002/nme.2659
- Bugeda G., Ródenas J.J., Albelda J. and Oñate E., Control of the finite element discretization error during the convergence of structural shape optimization algorithms, International Journal for Simulation and Multidisciplinary Design Optimization, Vol. 3 (3), pp. 363-369, 2009 doi:10.1051/ijsmdo/2009012
- Boroomand B., Najjar M. and Oñate E., The generalized finite point method, Computational Mechanics, Vol. 44, pp. 173-190, 2009 doi:10.1007/s00466-009-0363-x
- Rossi R., Ryzhakov P.B. and Oñate E., A monolithic FE formulation for the analysis of membranes in fluids, International Journal of Space Structures, Vol. 24 (4), pp. 205-210, 2009 doi:10.1260/026635109789968263
- Lomboy G.R., Suthasupradit S., Kim K.D. and Oñate E., Nonlinear formulations of a four-node quasi-conforming shell element, Archives of Computational Methods in Engineering, Vol. 16 (2), pp. 189-250, 2009 doi:10.1007/s11831-009-9030-9
- Idelsohn S.R., Marti J., Souto-Iglesias A. and Oñate E., Interaction between an elastic structure and free-surface flows: experimental versus numerical comparisons using the PFEM, Computational Mechanics, Vol. 43 (1), pp. 125-132, 2008 doi:10.1007/s00466-008-0245-7
- López R. and Oñate E., An extended class of multilayer perceptron, Neurocomputing, Vol. 71 (13-15), pp. 2538-2543, 2008 doi:10.1016/j.neucom.2007.12.037
- Labra C., Rojek J., Oñate E. and Zárate F., Advances in discrete element modelling of underground excavations, Acta Geotechnica, Vol. 3 (4), pp. 317-322, 2008 doi:10.1007/s11440-008-0071-2
- Idelsohn S.R., Marti J., Limache A. and Oñate E., Unified Lagrangian formulation for elastic solids and incompressible fluids: Application to fluid–structure interaction problems via the PFEM, Computer Methods in Applied Mechanics and Engineering, Vol. 197 (19-20), pp. 1762-1776, 2008 doi:10.1016/j.cma.2007.06.004
- Oñate E., Idelsohn S.R., Celigueta M.A., Rossi R., Advances in the particle finite element method for the analysis of fluid–multibody interaction and bed erosion in free surface flows, Computer Methods in Applied Mechanics and Engineering, Vol. 197 (19-20), pp. 1777-1800, 2008 doi:10.1016/j.cma.2007.06.005
- Rastellini F., Oller S., Salomon O. and Oñate E., Composite materials non-linear modelling for longfibre-reinforced laminates. Continuum basis, computational aspects and validations, Computers and Structures, Vol. 86 (9), pp. 879-896, 2008 doi:10.1016/j.compstruc.2007.04.009
- Fragakis Y. and Oñate E., Parallel Delaunay triangulation for particle finite element methods, Communications in Numerical Methods in Engineering, Vol. 24 (11), pp. 1009-1017, 2008 doi:10.1002/cnm.1007
- Bugeda G., Ródenas J.J. and Oñate E., An integration of a low cost adaptive remeshing strategy in the solution of structural shape optimization problems using evolutionary methods, Computers and Structures, Vol. 86 (13-14), pp. 1563-1578, 2008 doi:10.1016/j.compstruc.2007.05.010
- López R., Balsa-Canto E. and Oñate E., Neural networks for variational problems in engineering, Int. Journal for Numerical Methods in Engineering, Vol. 75 (11), pp. 1341-1360, 2008 doi:10.1002/nme.2304
- Nadukandi P., Oñate E. and García-Espinosa J., Analysis of a consistency recovery method for the 1D convection-diffusion equation using linear finite elements, International Journal for Numerical Methods in Fluids, Vol. 57 (9), pp 1291-1320, 2008 doi:10.1002/fld.1863
- García-Espinosa J., Valls A. and Oñate E., ODDLS: A new unstructured mesh finite element method for the analysis of free surface flow problems, Int. Journal for Numerical Methods in Engineering, Vol 76 (9), pp. 1297-1327, 2008 doi:10.1002/nme.2348
- Larese, A., Rossi, R., Oñate, E., Idelsohn, S.R., Validation of the particle finite element method (PFEM) for simulation of free surface flows, Engineering Computations, Vol. 25 (3-4), pp. 385-425, 2008 doi:10.1108/02644400810874976
- Löhner R., Yang C. and Oñate E., Simulation of flows with violent free surface motion and moving objects using unstructured grids, International Journal for Numerical Methods in Fluids, Vol. 53 (8), pp 1315-1338, 2007 doi:10.1002/fld.1244
- Limache A., Idelsohn S., Rossi R. and Oñate E., The violation of objectivity in Laplace formulations of the Navier-Stokes equations, International Journal for Numerical Methods in Fluids, Vol. 54 (6-8), pp 639-664, 2007 doi:10.1002/fld.1480
- Oñate E., Valls A. and García J., Modeling incompressible flows at low and high Reynolds numbers via a finite calculus-finite element approach, Journal of Computational Physics, Vol. 224 (1), pp. 332-351, 2007 doi:10.1016/j.jcp.2007.02.026
- Ortega E., Oñate E. and Idelsohn S., An improved finite point method for tridimensional potential flows, Computational Mechanics, Vol. 40 (6), pp. 949-963, 2007 doi:10.1007/s00466-006-0154-6
- Oñate E., Valls A. and García J., Computation of turbulent flows using a finite calculus-finite element formulation, International Journal for Numerical Methods in Fluids, Vol. 54 (6-8), pp 609-637, 2007 doi:10.1002/fld.1476
- Lomboy G.R., Kim K.D. and Oñate E., A co-rotational 8-node resultant shell element for progressive nonlinear dynamic failure analysis of laminated composite structures, Mechanics of Advanced Materials and Structures, Vol. 14 (2), pp. 89-105, 2007 doi:10.1080/15376490600675299
- Flores F. and Oñate E., A rotation-free shell triangle for the analysis of kinked and branching shells, Int. Journal for Numerical Methods in Engineering, Vol. 69 (7), pp. 1521-1551, 2007 doi:10.1002/nme.1823
- Felippa C. A. and Oñate E., Nodally exact Ritz discretizations of 1D diffusion-absorption and Helmholtz equations by variational FIC and modified equation methods, Computational Mechanics, Vol. 39 (2), pp. 91-111, 2007 doi:10.1007/s00466-005-0011-z
- Oñate E., Miquel J. and Zárate F., Stabilized solution of the multidimensional advection-diffusion-absorption equation using linear finite elements, Computers & Fluids, Vol. 36 (1), pp. 92-112, 2007 doi:10.1016/j.compfluid.2005.07.003
- Del Pin F., Idelsohn S., Oñate E. and Aubry R., The ALE/Lagrangian particle finite element method: A new approach to computation of free-surface flows and fluid-object interactions, Computers & Fluids, Vol. 36 (1), pp. 27-38, 2007 doi:10.1016/j.compfluid.2005.06.008
- Rojek J. and Oñate E., Multiscale analysis using a coupled discrete/finite, Interaction and Multiscale Mechanics: An International Journal (IMMIJ), Vol. 1 (1), pp. 1-31, 2007 doi:10.12989/imm.2008.1.1.001
- Flores F. and Oñate E., Rotation-free finite element for the non-linear analysis of beams and axisymmetric shells, Computer Methods in Applied Mechanics and Engineering, Vol. 195 (41-43), pp. 5297-5315, 2006 doi:10.1016/j.cma.2005.08.021
- Oñate E., Rojek J., Chiumenti M., Idelsohn S.R., Del Pin F. and Aubry R., Advances in stabilized finite element and particle methods for bulk forming processes, Computer Methods in Applied Mechanics and Engineering, Vol. 195 (48-49), pp. 6750-6777, 2006 doi:10.1016/j.cma.2004.10.018
- Oñate E., Celigueta M.A. and Idelsohn S.R., Modeling bed erosion in free surface flows by the particle finite element method, Acta Geotechnica, Vol 1 (4), pp. 237-252, 2006 doi:10.1007/s11440-006-0019-3
- Idelsohn S.R. and Oñate E., To mesh or not to mesh. That is the question..., Computer Methods in Applied Mechanics and Engineering, Vol. 195 (37-40), pp. 4681-4696, 2006 doi:10.1016/j.cma.2005.11.006
- Mora J., Otín R., Dadvand P. Escolano E., Pasenau Miguel A. andOñate E., Open tools for electromagnetic simulation progrms, The International Journal for Computation and Mathematics in Electrical and Electronic Engineering (Compel), Vol. 25 (3), pp. 551-564, 2006 doi:10.1108/03321640610666709
- Aubry R., Idelsohn S. R. and Oñate E., Fractional step like schemes for free surface problems with thermal coupling using the Lagrangian PFEM, Computational Mechanics, Vol. 38 (4-5), pp. 294-309, 2006 doi:10.1007/s00466-006-0058-5
- Perazzo F., Oller S., Miquel J. y Oñate E., Avances en el método de puntos finitos para la mecánica de sólidos, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 22 (2), pp. 153-167, 2006
- Neamtu L. y Oñate E., Un punto de vista sobre el uso de la simulación en la industria de estampación de chapa metálica, Deformación Metálica, Vol. 287, Marzo-Abril 2006
- Oñate E., Arteaga J., García Espinosa J. and Flores R., Error estimation and mesh adaptivity in incompressible viscous flows using a residual power approach, Computer Methods in Applied Mechanics and Engineering, Vol. 195 (4-6), pp. 339 362, 2006 doi:10.1016/j.cma.2004.07.054
- Oñate E., García J., Idelsohn S. R., and Del Pin F., Finite calculus formulations for finite element analysis of incompressible flows. Eulerian, ALE and Lagrangian approaches, Computer Methods in Applied Mechanics and Engineering, Vol. 195 (23-24), pp. 3001-3037, 2006 doi:10.1016/j.cma.2004.10.016
- Oñate E., Miquel J. and Hauke G., Stabilized formulation for the advection–diffusion–absorption equation using finite calculus and linear finite elements, Computer Methods in Applied Mechanics and Engineering, Vol. 195 (33-36), pp. 3926-3946, 2006 doi:10.1016/j.cma.2005.07.020
- Oñate E., Zárate F. and Idelsohn S., Finite element formulation for convective–diffusive problems with sharp gradients using finite calculus, Computer Methods in Applied Mechanics and Engineering, Vol. 195 (13-16), pp. 1793-1825, 2006 doi:10.1016/j.cma.2005.05.036
- Löhner R., Yang C. and Oñate E., On the simulation of flows with violent free surface motion, Computer Methods in Applied Mechanics and Engineering, Vol. 195 (41-43), pp. 5597 - 5620, 2006 doi:10.1016/j.cma.2005.11.010
- Recarey C., Oñate E., Miquel J., Rojek J., Zárate F. y Burrel S., Simulación de problemas de desgaste, en la interacción herramienta de corte terreno, empleando el método de los elementos discretos, Ingeniería Civil, Vol. 141, pp. 19-34, 2006
- Idelsohn S. R., Oñate E., Del Pin F. and Calvo N., Fluid-structure interaction using the particle finite element method, Computer Methods in Applied Mechanics and Engineering, Vol. 195 (17-18), pp. 2100-2123, 2006 doi:10.1016/j.cma.2005.02.026
- Rojek J., Oñate E. and Taylor R. L., CBS-based stabilization in explicit solid dynamics, Int. Journal for Numerical Methods in Engineering, Vol. 66 (10), pp. 1547-1568, 2006 doi:10.1002/nme.1689
- Oñate E., Valls A. and García Espinosa J., FIC/FEM formulation with matrix stabilizing terms for incompressible flows at low and high Reynolds numbers, Computational Mechanics, Vol. 38 (4-5), pp. 440-455, 2006 doi:10.1007/s00466-006-0060-y
- Agüero A., Pallarés F. and Oñate E., The rotation-free BST shell element for linearized buckling analysis of steel structures, Int. Journal for Computational Methods in Engineering Science and Mechanics, Vol. 7 (3), pp. 209-215, 2006 doi:10.1080/15502280600596646
- Rossi R., Lazzari M., Vitaliani R. and Oñate E., Simulation of light-weight membrane structures by wrinkling model, Int. Journal for Numerical Methods in Engineering, Vol. 62 (15), pp. 2127-2153, 2005 doi:10.1002/nme.1266
- Flores F. y Oñate E., Un elemento de lámina sin grados de libertad rotacionales para el análisis de cáscaras con quiebres y ramificadas, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 21 (4), pp. 385-411, 2005
- Hurtado J., Zárate F. and Oñate E., Reliability estimation of the sheet stamping process using support vector machines, International Journal of Vehicle Design, Vol. 39 (1/2), pp.110–124, 2005 doi:10.1504/IJVD.2005.007223
- Aubry R., Idelsohn S.R. and Oñate E., Particle finite element method in fluid-mechanics including thermal convection-diffusion, Computers and Structures, Vol. 83 (17-18), pp 1459-1475, 2005 doi:10.1016/j.compstruc.2004.10.021
- Boroomand B., Tabatabaei A. A. and Oñate E., Simple modifications for stabilization of the finite point method, Int. Journal for Numerical Methods in Engineering, Vol. 63 (3), pp. 351-379, 2005 doi:10.1002/nme.1278
- Oñate E. and Flores F. G., Advances in the formulation of the rotation-free basic shell triangle, Computer Methods in Applied Mechanics and Engineering, Vol. 194 (21-24), pp. 2406-2443, 2005 doi:10.1016/j.cma.2004.07.039
- Recarey C., Oñate E., Rojek J., Miquel J., Zárate F., Cadoce G. y Labra C., Modelación del ensayo brasileño empleando modelación discreta, Ingeniería Civil, Vol. 139, pp. 112-124, 2005
- Flores F. and Oñate E., Improvements in the membrane behaviour of the three node rotation-free BST shell triangle using an assumed strain approach., Computer Methods in Applied Mechanics and Engineering, Vol. 194 (6-8), pp. 907-932, 2005 doi:10.1016/j.cma.2003.08.012
- Oller S., Salomon O. and Oñate E., A continuum mechanics model for mechanical fatigue analysis, Computational Materials Science, Vol. 32 (2), pp. 175-195, 2005 doi:10.1016/j.commatsci.2004.08.001
- Idelsohn S.R., Oñate E. and Del Pin F., The particle finite element method: a powerful tool to solve incompressible flows with free-surfaces and breaking waves, Int. Journal for Numerical Methods in Engineering, Vol. 61 (7), pp. 964-989, 2004 doi:10.1002/nme.1096
- Felippa C. and Oñate E., Volumetric constraint models for anisotropic elastic solids, Journal of Applied Mechanics-Transactions of the Asme, Vol. 71 (5), pp. 731-734, 2004 doi:10.1115/1.1748318
- Oñate E., Rojek J., Taylor R.L. and Zienkiewicz O.C., Finite calculus formulation for incompressible solids using linear triangles and tetrahedra, Int. Journal for Numerical Methods in Engineering, Vol. 59 (11), pp. 1473-1500, 2004 doi:10.1002/nme.922
- García Espinosa J., Oñate E., Helmers J.B. y Chakkor M.R., Análisis CFD del movimiento de balance de un portacontenedores, Revista de Ingeniería Naval, Vol. 814, pp. 104-108, 2004
- Oñate E., El valor del cálculo en los sistemas de ayuda a la toma de decisiones en ingeniería, Revista de Obras Públicas, Vol. 151 (3449), pp. 41-48, Noviembre 2004
- Löhner R. and Oñate E., A general advancing front technique for filling space with arbitrary objects, Int. Journal for Numerical Methods in Engineering, Vol. 61 (12), pp. 1977-1991, 2004 doi:10.1002/nme.1068
- Agüero A., J. R. Atienza y Oñate E., Método aproximado para estimar el estado límite último en entramados metálicos esbeltos, Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 20 (3), 277 - 295, 2004
- Perazzo F., Miquel J. y Oñate E., El método de puntos finitos para problemas de la dinámica de sólidos, Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 20 (3), 235-246, 2004
- Oñate E., Idelsohn S.R., Del Pin F. and Aubry R., The particle finite element method. An overview, Int. J. Computat. Methods, Vol. 1 (2), pp. 267-307, 2004 doi:10.1142/S0219876204000204
- Oñate E. and Rojek J., Combination of discrete element and finite element methods for dynamic analysis of geomechanics problems, Computer Methods in Applied Mechanics and Engineering, Vol. 193 (27-29), pp. 3087-3128, 2004 doi:10.1016/j.cma.2003.12.056
- Oñate E., Possibilities of finite calculus in computational mechanics, Int. Journal for Numerical Methods in Engineering, Vol. 60, pp. 255-281, 2004 doi:10.1002/nme.961
- Oñate E., Idelsohn S.R., Del Pin F. and Aubry R., Possibilities of the particle finite element method for fluid-structure interaction problems with free surface waves, Revue Européenne des Éléments Finis, Vol. 13, pp. 637-666, 2004 doi:10.3166/reef.13.637-666
- Agüero A., J. R. Atienza y Oñate E., Estudio de inestabilidad inicial de paneles con el elemento BST, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 20 (4), pp. 341-354, 2004
- García Espinosa J. and Oñate E., An unstructured finite element solver for ship hydrodynamics problems, Journal of Applied Mechanics, Vol. 70 (1), pp. 18 - 26, 2003 doi:10.1115/1.1530631
- Idelsohn S. R., Oñate E. and Del Pin F., A Lagrangian meshless finite element method applied to fluid-structure interaction problems, Computers and Structures, Vol. 81 (8-11), pp. 655-671, 2003 doi:10.1016/S0045-7949(02)00477-7
- Idelsohn S.R., Calvo N. and Oñate E., Polyhedrization of an arbitrary 3D point set, Computer Methods in Applied Mechanics and Engineering, Vol. 192 (22-24), pp. 2649 - 2667, 2003 doi:10.1016/S0045-7825(03)00298-6
- Oñate E., Taylor R.L., Zienkiewicz O. C., and Rojek J., A residual correction method based on finite calculus, Engineering Computations, Vol. 20 (5/6), pp. 629-658, 2003 doi:10.1108/02644400310488790
- Idelsohn S.R., Oñate E., Calvo N. and Del Pin F., The meshless finite element method, Int. Journal for Numerical Methods in Engineering, Vol. 58 (6), pp. 893- 912, 2003 doi:10.1002/nme.798
- Calvo N., Idelsohn S.R. and Oñate E., The extended Delaunay tessellation, Engineering Computations, Vol. 20 (5/6), pp. 583-600, 2003 doi:10.1108/02644400310488763
- Oñate E., Multiscale computational analysis in mechanics using finite calculus: an introduction, Computer Methods in Applied Mechanics and Engineering, Vol. 192 (28-30), pp. 3043 - 3059, 2003 doi:10.1016/S0045-7825(03)00340-2
- Felippa C. A. and Oñate E., Stress, strain and energy splittings for anisotropic elastic solids under volumetric constraints, Computers and Structures, Vol. 81 (13), pp. 1343- 357, 2003 doi:10.1016/S0045-7949(03)00060-9
- Oñate E., Peric D., FEM class of 42, Engineering Computations, Vol. 20 (5-6), pp. 494-498, 2003
- Tschöpe H., Wriggers P. and Oñate E., Direct computation of instability points with inequality constraints using the FEM, Engineering Computations, Vol. 20 (5/6), pp. 611-628, 2003 doi:10.1108/02644400310488781
- Tschöpe H., Oñate E. and Wriggers P., Direct computation of instability points for contact problems, Computational Mechanics, Vol. 31 (1-2), pp. 173-178, 2003 doi:10.1007/s00466-002-0403-2
- Suárez B., Oñate E. y Ribó R., Las herramientas numéricas y la práctica profesional en la ingeniería civil, Revista de Obras Públicas, No. 3418, pp. 7 - 15, Febrero 2002
- D`Elía J., Storti M., Oñate E. and Idelsohn S.R., A Lagrangian panel method in the time domain for moving free-surface potential flows, Int. Journal for Numerical Methods in Engineering, Vol. 16 (4), pp. 263-275, 2002 doi:10.1080/1061856021000025148
- Löhner R., Sacco C., Oñate E. and Idelsohn S., A finite point method for compressible flow, Int. Journal for Numerical Methods in Engineering, Vol. 53 (8), pp. 1765-1779, 2002 doi:10.1002/nme.334
- Car E., Zalamea F., Oller S., Miquel J. and Oñate E., Numerical simulation of fiber reinforced composite materials - two procedures, Int. Journal of Solids and Structures, Vol. 39 (7), pp. 1967-1986, 2002 doi:10.1002/nme.334
- Oñate E., Posibilidades de los métodos numéricos en el mundo industrial, Col·lecció Aula de Ciència i Cultura nº 13, Fundació Caixa de Sabadell, pp. 9-33, Sabadell (España), 2002
- Oñate E., Cendoya P. and Miquel J., Non-linear explicit dynamic analysis of shells using the BST rotation-free triangle, Engineering Computations, Vol. 19 (6), pp. 662-706, 2002 doi:10.1108/02644400210439119
- Ribó R., Bugeda G. and Oñate E., Some algorithms to correct a geometry in order to create a finite element mesh, Computers and Structures, Vol. 80 (16-17), pp. 1399-1408, 2002 doi:10.1016/S0045-7949(02)00105-0
- Hanganu A.D., Oñate E., Barbat A.H., A finite element methodology for local/global damage evaluation in civil engineering structures, Computers and Structures, Vol. 80 (20-21), pp. 1667-1687, 2002 doi:10.1016/S0045-7949(02)00012-3
- Salomón O., Oller S. and Oñate E., Fatigue analysis of materials and structures using a continuum damage model, International Journal of Forming Processes, Vol. 5 (2-3-4), pp. 493-503, 2002 doi:10.3166/ijfp.5.493-503
- Oñate E., Perazzo F. and Miquel J., A finite point method for elasticity problems, Computers and Structures, Vol. 79 (22-25), pp. 2151-2163, 2001 doi:10.1016/S0045-7949(01)00067-0
- Scotta R., Vitaliani R., Saetta A., Oñate E. and Hanganu A., A scalar damage model with a shear retention factor for the analysis of reinforced concrete structures: theory and validation, Computers and Structures, Vol. 79, pp. 737-755, 2001 doi:10.1016/S0045-7949(00)00178-4
- Oñate E., Tschöpe H. and Wriggers P., Combination of the critical displacement method with a damage model for structural instability analysis, Engineering Computations, Vol. 18 (3-4), pp. 642-662, 2001 doi:10.1108/02644400110387190
- López Rodríguez M., García Espinosa J. y Oñate E., Optimización de embarcaciones de recreo mediante la utilización de un código CFD, Ingeniería Naval, No. 784, pp. 122-130, 2001
- Car E., Oller S. and Oñate E., A large strain plasticity model for anisotropic materials - composite material application, International Journal of Plasticity, Vol. 17 (11), pp. 1437-1463, 2001 doi:10.1016/S0749-6419(00)00098-X
- Idelsohn S., Storti M. and Oñate E., Lagrangian formulations to solve free surface incompressible inviscid fluid flows, Computer Methods in Applied Mechanics and Engineering, Vol. 191 (6-7), pp. 583-593, 2001 doi:10.1016/S0045-7825(01)00303-6
- Oñate E. and García J., A finite element method for fluid-structure interaction with surface waves using a finite calculus formulation, Computer Methods in Applied Mechanics and Engineering, Vol. 191 (6-7), pp. 635-660, 2001 doi:10.1016/S0045-7825(01)00306-1
- Flores F.G. and Oñate E., A basic thin shell triangle with only translational DOFs for large strain plasticity, Int. Journal for Numerical Methods in Engineering, Vol. 51 (1), pp. 57-83, 2001 doi:10.1002/nme.147
- Rojek J., O.C. Zienkiewicz, Oñate E. and Postek E., Advances in FE explicit formulation for simulation of metalforming processes, Journal of Materials Processing Technology, Vol. 119 (1-3), pp. 41-47, 2001 doi:10.1016/S0924-0136(01)00894-9
- Oñate E., Sacco C. and Idelsohn S., A finite point method for incompressible flow problems, Computing and Visualization in Science, Vol. 3 (1-2), pp. 67-75, 2000 doi:10.1007/s007910050053
- Oñate E. and Zárate F., Rotation-free triangular plate and shell elements, Int. Journal for Numerical Methods in Engineering, Vol. 47 (1-3), pp. 557-603, 2000, ;2-9 doi:10.1002/(SICI)1097-0207(20000110/30)47:1/3<557::AID-NME784>3.0.CO
- Oñate E., A stabilized finite element method for incompressible viscous flows using a finite increment calculus formulation, Computer Methods in Applied Mechanics and Engineering, Vol. 182 (3-4), pp. 355-370, 2000 doi:10.1016/S0045-7825(99)00198-X
- Chiandussi G., Bugeda G. and Oñate E., A simple method for automatic update of finite element meshes, Communications in Numerical Methods in Engineering, Vol. 16 (1), pp. 1-19, 2000, ;2-A doi:10.1002/(SICI)1099-0887(200001)16:1<1::AID-CNM310>3.0.CO
- Car E., Oller S. and Oñate E., An anisotropic elastoplastic constitutive model for large strain analysis of fiber reinforced composite materials, Computer Methods in Applied Mechanics and Engineering, Vol. 185 (2-4), pp. 245-277, 2000 doi:10.1016/S0045-7825(99)00262-5
- Oñate E., Desarrollos y aplicaciones de modelos de fractura en la Escuela de Ingenieros de Caminos de Barcelona, Anales de Mecánica de la Fractura, Vol. 17, pp. 127-154, 2000
- Chiandussi G., Bugeda G. and Oñate E., Shape variable definition with C0, C1 and C2 continuity functions, Computer Methods in Applied Mechanics and Engineering, Vol. 188 (4), pp. 727-742, 2000 doi:10.1016/S0045-7825(99)00358-8
- Codina R., Morton C., Oñate E. and Soto O., Numerical aerodynamic analysis of large buildings using a finite element model with application to a telescope building, Int. Journal of Numerical Methods for Heat and Fluid Flow, Vol. 10 (6), pp. 616-633, 2000 doi:10.1108/09615530010347196
- Löhner R., Yang C., Oñate E. and Idelsohn S., An unstructured grid-based, parallel free surface solver, Applied Numerical Mathematics, Vol. 31 (3), pp. 271 - 293, 1999 doi:10.1016/S0168-9274(99)00002-1
- Botello S., Miquel J. and Oñate E., A layer-wise triangle for analysis of laminated composites, plates and shells, Computers and Structures, Vol. 70 (6), pp. 647-666, 1999 doi:10.1016/S0045-7949(98)00165-5
- Bugeda G. and Oñate E., Optimum aerodynamic shape design for fluid flow problems including mesh adaptivity, International Journal for Numerical Methods in Fluids, Vol. 30 (2), pp. 161-178, 1999, ;2-J doi:10.1002/(SICI)1097-0363(19990530)30:2<161::AID-FLD831>3.0.CO
- Idelsohn S.R., Oñate E. and Sacco C., Finite element solution of free-surface ship-wave problems, Int. Journal for Numerical Methods in Engineering, Vol. 45 (5), pp. 503-528, 1999, ;2-E doi:10.1002/(SICI)1097-0207(19990620)45:5<503::AID-NME570>3.0.CO
- Botello S., Marroquin J. L., Oñate E. and Van Horebeek J., Solving structural optimization problems with genetic algorithms and simulated annealing, Int. Journal for Numerical Methods in Engineering, Vol. 45 (5), pp. 1069-1084, 1999, ;2-E doi:10.1002/(SICI)1097-0207(19990720)45:8<1069::AID-NME620>3.0.CO
- Cruchaga M. A. and Oñate E., A generalized streamline finite element approach for the analysis of incompressible flow problems including moving surfaces, Computer Methods in Applied Mechanics and Engineering, Vol. 173, Nos. 1-2, pp. 241-255, 1999 doi:10.1016/S0045-7825(98)00272-2
- Oñate E. and Manzan M., A general procedure for deriving stabilized space-time finite element methods for advective-diffusive problems, International Journal for Numerical Methods in Fluids, Vol. 31 (1), pp. 203 - 221, 1999, ;2-Z doi:10.1002/(SICI)1097-0363(19990915)31:1<203::AID-FLD964>3.0.CO
- Lopez J., Oller S., Oñate E. and Lubliner J., A homogeneous constitutive model for masonry, Int. Journal for Numerical Methods in Engineering, Vol. 46, pp. 1651 - 1671, 1999, ;2-2 doi:10.1002/(SICI)1097-0207(19991210)46:10<1651::AID-NME718>3.0.CO
- Botello S., Marroquín J.L. y Oñate E., Un modelo de optimización estocástica aplicado a la optimización de estructuras de barras prismáticas, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 15, Nº 4, pp. 425 - 434, 1999
- Blanco E., Gil Ll. Suárez B. y Oñate E., Experiencias en la enseñanza asistida por ordenador de métodos numéricos para cálculo de estructuras, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 5, Nº 2, pp. 297 - 306, 1999
- Bugeda G., Gil L. and Oñate E., Structural shape sensitivity analysis for nonlinear material models with strain softening, Structural Optimization, Vol. 17 (2-3), pp. 162-171, 1999 doi:10.1007/BF01195941
- Rubert J.B., Oller S., Las Casas E., Proença S.P.B. and Oñate E., A large strain explicit formulation for composites, Int. Journal for Numerical Methods in Engineering, Vol. 46 (10), pp. 1595-1607, 1999, ;2-Z doi:10.1002/(SICI)1097-0207(19991210)46:10<1595::AID-NME715>3.0.CO
- Taylor R.L., Zienkiewicz O.C. and Oñate E., A hierarchical finite element method based on the partition of unity, Computer Methods in Applied Mechanics and Engineering, Vol. 152 (1-2), pp. 73-84, 1998 doi:10.1016/S0045-7825(97)00182-5
- Car E., Oller S. y Oñate E., Un modelo constitutivo elasto plástico acoplado con daño mecánico e higrométrico. Aplicación a pavimentos flexibles, Revista Internacional de Ingeniería de Estructuras, Vol. 2 (2), pp. 20-38, 1998
- Estupiñán J., Oñate E. y Suárez B., Optimización topológica mediante algoritmos genéticos, estrategias evolutivas y el método de Baluja, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 14 (4), pp. 427 - 438, 1998
- Rojek J. and Oñate E., Sheet springback analysis using a simple shell triangle with translational degrees of freedom only, International Journal of Forming Processes, Vol. 1, nº 3, pp. 275 - 296, 1998
- Suárez B., Blanco E., Gil Ll., Zapata P. and Oñate E., Ed-Elas2D: An educational program for computer-aided training in structural analysis using the finite element method, European Journal of Engineering Education, Vol. 23, nº 2, pp. 243-254, 1998 doi:10.1080/03043799808923502
- Oñate E., García J. and Idelsohn S., Computation of the stabilization parameter for the finite element solution of advective-diffusive problems, International Journal for Numerical Methods in Fluids, Vol. 25 (12), pp. 1385-1407, 1998, ;2-7 doi:10.1002/(SICI)1097-0363(19971230)25:12<1385::AID-FLD678>3.0.CO
- Löhner R. and Oñate E., An advancing front point generation technique, Communications in Numerical Methods in Engineering, Vol. 14, pp. 1097-1108, 1998, ;2-7 doi:10.1002/(SICI)1099-0887(199812)14:12<1097::AID-CNM183>3.0.CO
- Oñate E. and Idelsohn S., A mesh-free finite point method for advective-diffusive transport and fluid flow problems, Computational Mechanics, Vol. 21, pp. 283-292, 1998 doi:10.1007/s004660050304
- Barbat A.H., Cervera M., Hanganu A., Cirauqui C. and Oñate E., Failure pressure evaluation of the containment building of a large dry nuclear power plant, Nuclear Engineering and Design, Vol. 180, pp. 251-270, 1998 doi:10.1016/S0029-5493(97)00329-4
- Rojek J., Oñate E. and Postek E., Application of explicit FE codes to simulation of sheet and bulk forming processes, Journal of Materials Processing Technology, Vols. 80-81, pp. 620-627, 1998 doi:10.1016/S0924-0136(98)00169-1
- Gil Ll., Bugeda G. y Oñate E., Análisis de sensibilidad de formas en problemas estructurales con comportamiento no lineal del material, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 14, 3, 403 - 420, 1998
- Morán A., Oñate E. and Miquel J., A general procedure for deriving symmetric expressions for the secant and tangent stiffness matrices in finite element analysis, Int. Journal for Numerical Methods in Engineering, Vol. 42, pp. 219-236, 1998 doi:10.1002/(SICI)1097-0207(19980530)
- Oñate E., Derivation of stabilized equations for numerical solution of advective-diffusive transport and fluid flow problems, Computer Methods in Applied Mechanics and Engineering, Vol. 151, pp. 233-265, 1998 doi:10.1016/S0045-7825(97)00119-9
- Barbat A.H., Oller S., Oñate E. and Hanganu A., Viscous damage model for Timoshenko beam structures, Int. Journal of Solids and Structures, Vol. 34 (30), pp. 3953 - 3976, 1997 doi:10.1016/S0020-7683(97)00004-8
- Matias W. T. y Oñate E., Análisis de la inestabilidad de estructuras por el método de desplazamiento crítico, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 13 (2), pp. 241-263, 1997
- Cruchaga M. and Oñate E., A finite element formulation for incompressible flow problems using a generalized streamline operator, Computer Methods in Applied Mechanics and Engineering, Vol. 143 (1-2), pp. 49-67, 1997 doi:10.1016/S0045-7825(97)84579-3
- Rojek J., Jovicevic J. and Oñate E., Industrial applications of sheet-stamping simulation using new finite element models, Computer Modeling and Simulation in Engineering, Vol. 60 (1-4), pp. 243-247, 1996 doi:10.1016/0924-0136(96)02337-0
- Heinrich J.C., Idelsohn S.R., Oñate E. and Vionnet C.A., Boundary conditions for finite element simulations of convective flows with artificial boundaries, Int. Journal for Numerical Methods in Engineering, Vol. 39(6), pp. 1053-1071, 1996 doi:10.1002/(SICI)1097-0207(19960330)
- Celentano D., Oller S. and Oñate E., A coupled thermomechanical model for the solidification of cast metals, Int. Journal of Solids and Structures, Vol. 33, No. 5, pp. 647-673, 1996 doi:10.1016/0020-7683(95)00056-G
- Oller S., Oñate E., Miquel J. and Botello S., A plastic damage constitutive model for composite materials, Int. Journal of Solids and Structures, Vol. 33, No. 17, pp. 2501-2518, 1996 doi:10.1016/0020-7683(95)00161-1
- Idelsohn S.R., Heinrich J.C. and Oñate E., Petrov-Galerkin methods for the transient advective-diffusive equation with sharp gradients, Int. Journal for Numerical Methods in Engineering, Vol. 39(9), pp. 1455-1473, 1996 doi:10.1002/(SICI)1097-0207(19960515)
- Oller S. and Oñate E., A hygro-thermo-mechanical constitutive model for multiphase composite materials, Int. Journal of Solids and Structures, Vol. 33, No. 20-22, pp. 3179-3186, 1996 doi:10.1016/0020-7683(95)00248-0
- Oñate E., Idelsohn S., Zienkiewicz O.C. and Taylor R.L., A finite point method in computational mechanics. Applications to convective transport and fluid flow, Int. Journal for Numerical Methods in Engineering, Vol. 39(22), pp. 3839-3866, 1996 doi:10.1002/(SICI)1097-0207(19961130)
- Oñate E., Idelsohn S., Zienkiewicz O.,Taylor R.L. and Sacco C., A stabilized finite point method for analysis of fluid mechanics problems, Computer Methods in Applied Mechanics and Engineering, Vol. 139(1-4), pp. 315-346, 1996 doi:10.1016/S0045-7825(96)01088-2
- Oñate E. and Matias W.T., A critical displacement approach for predicting structural instability, Computer Methods in Applied Mechanics and Engineering, Vol. 134(1-2), pp. 135-161, 1996 doi:10.1016/0045-7825(96)01032-8
- Oller S., Oñate E. and Miquel J., Mixing anisotropic formulation for analysis of composites, Communications in Numerical Methods in Engineering, Vol. 12(8), pp. 471-482, 1996 doi:10.1002/(SICI)1099-0887(199608)
- Bugeda G. and Oñate E., Optimum aerodynamic shape design including mesh adaptivity, International Journal for Numerical Methods in Fluids, Vol. 20(8-9), pp. 915-934, 1995 doi:10.1002/fld.1650200814
- Flores F.G., Oñate E. and Zarate F., New assumed strain triangles for non linear shell analysis, Computational Mechanics, Vol. 17(1-2), pp. 107-114, 1995 doi:10.1007/BF00356483
- Oller S., Botello S., Miquel J. and Oñate E., An anisotropic elastoplastic model based on an isotropic formulation, Engineering Computations, Vol. 12(3), pp. 245-262, 1995 doi:10.1108/02644409510799587
- Cruchaga M., Oñate E. and Idelsohn S. R., On the pseudomaterial approach for the analysis of transient forming processes, Communications in Numerical Methods in Engineering, Vol. 11(2), pp. 137-148, 1995 doi:10.1002/cnm.1640110207
- Bugeda G., Cervera M., Lombera G. and Oñate E., Numerical analysis of stereolithography processes using the finite element method, Rapid Prototyping Journal, Vol. 1, No. 2, pp. 13-23, 1995 doi:10.1108/13552549510086835
- Lombera G., Bugeda G., Cervera M. and Oñate E., Análisis de procesos de estereolitografía por el método de los elementos finitos, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 11, No. 2, pp. 205-224, 1995
- Cervera M., Barbat A.H., Hanganu H., Oñate E. and Cirauqui C., Evaluación de la presión de fallo del edificio de contención de una central nuclear tipo PWR-W tres lazos. Parte I: Metodología, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 11, No. 2, pp. 271-293, 1995
- Botello S., Oñate E. and Miquel J., Un modelo de elementos finitos con aproximación bidimensional por capas para el análisis de estructuras multilaminares, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 11, No. 2, pp. 225-246, 1995
- Heege A., Alart P. and Oñate E., Numerical modelling and simulation of frictional contact using a generalised Coulomb law, Engineering Computations, Vol. 12, No. 7, pp. 641-656, 1995 doi:10.1108/02644409510799820
- Oñate E., Rojek J. and García Garino C., NUMISTAMP: a research project for assessment of finite-element models for stamping processes, Journal of Materials Processing Technology, Vol. 50(1-4), pp. 17-38, 1995 doi:10.1016/0924-0136(94)01367-A
- Barbat A.H., Cervera M., Cirauqui C., Hanganu H. y Oñate E., Evaluación de la presión de fallo del edificio de contención de una central nuclear tipo PWR-W tres lazos. Parte II: Simulación numérica, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 11, No. 3, pp. 451-475, 1995
- Oñate E. y Botello S., Modelización de problemas de gran tamaño en el sector transporte, utilizando métodos numéricos y supercomputadoras, Acta Universitaria, Vol. 5, No. 1, pp. 15-25, 1995
- Oñate E., On the derivation and possibilities of the secant stiffness matrix for non linear finite element analysis, Computational Mechanics, Vol. 15(6), pp. 572-593, 1995 doi:10.1007/BF00350269
- Oñate E., Cervera M. and Zienkiewicz O.C., A finite volume format for structural mechanics, Int. Journal for Numerical Methods in Engineering, Vol. 37(2), pp.181-201, 1994 doi:10.1002/nme.1620370202
- Bugeda G. and Oñate E., A methodology for adaptive mesh refinement in optimum shape design, Computing Systems in Engineering, Vol. 5, No. 1, pp. 91-102, 1994 doi:10.1016/0956-0521(94)90040-X
- Idelsohn S. R. and Oñate E., Finite volumes and finite elements: two, Int. Journal for Numerical Methods in Engineering, Vol. 37(19), pp. 3323-3341, 1994 doi:10.1002/nme.1620371908
- Celentano D., Oñate E. and Oller S., A temperature-based formulation for finite element analysis of generalized phase-change problems, Int. Journal for Numerical Methods in Engineering, Vol. 37(20), pp. 3441-3465, 1994 doi:10.1002/nme.1620372004
- Codina R., Schäfer U. and Oñate E., Mould filling simulation using finite elements, Int. Journal of Numerical Methods for Heat and Fluid Flow, Vol. 4(4), pp. 291-310, 1994 doi:10.1108/EUM0000000004108
- Oñate E., Zárate F. and Flores F., A simple triangular element for thick and thin plate and shell analysis, Int. Journal for Numerical Methods in Engineering, Vol. 37(15), pp. 2569-2582, 1994 doi:10.1002/nme.1620371505
- Oñate, E. and Cervera M., Derivation of thin plate bending elements with one degree of freedom per node: a simple three node triangle, Engineering Computations, Vol. 10(6), pp. 543-561, 1993 doi:10.1108/eb023924
- Oñate, E. and Bugeda G., A study of mesh optimality criteria in adaptive finite element analysis, Engineering Computations, Vol. 10(4), pp. 307-321, 1993 doi:10.1108/eb023910
- Codina R., Cervera M. and Oñate E., A penalty finite element method for non-Newtonian creeping flows, Int. Journal for Numerical Methods in Engineering, Vol. 36(8), pp.1395-1412, 1993 doi:10.1002/nme.1620360808
- Celentano D., Oller S. and Oñate E., A finite-element model for thermomechanical analysis in casting processes, Journal de Physique IV, Vol. 3 (C7), pp. C7-1171-C7-1180, Part 2, 1993 doi:10.1051/jp4:19937182
- Sosnowski W., Oñate E. and Agelet de Saracibar C., Comparative study on sheet metal forming processes by numerical modelling and experiment, Journal of Materials Processing Technology, Vol. 34 (1-4), pp. 109-116, 1992 doi:10.1016/0924-0136(92)90096-B
- Oñate E., Zienkiewicz O.C., Suárez B. and Taylor R.L., A general methodology for deriving shear constrained Reissner-Mindlin plate elements, Int. Journal for Numerical Methods in Engineering, Vol. 33(2), pp. 345-367, 1992 doi:10.1002/nme.1620330208
- Codina R., Oñate E. and Cervera M., The intrinsic time for the streamline upwind Petrov-Galerkin formulation using quadratic elements, Computer Methods in Applied Mechanics and Engineering, Vol. 94(2), pp. 239-262, 1992 doi:10.1016/0045-7825(92)90149-E
- Oñate E., Simulación por ordenador de problemas de conformado por el Método de los Elementos Finitos, Deformación Metálica, 1991
- Oñate E. and Agelet de Saracibar C., Finite element analysis of sheet metal forming problems using a selective viscous bending/membrane formulation, Int. Journal for Numerical Methods in Engineering, Vol. 30 (8), pp. 1577-1593, 1990
- Cervera M., Oliver J., Herrero E. and Oñate E., A computational model for progressive cracking in large dams due to the swelling of concrete, Int. Journal of Engineering Fracture Mechanics, Vol. 35, No. 1-3, pp. 573-585, 1990 doi:10.1016/0013-7944(90)90232-6
- Oñate E., Agelet de Saracibar C. y Dalin J.B., Análisis por elementos finitos de procesos de embutición de chapa mediante un modelo viscoplástico con degradación por huecos, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 6, No. 1, pp. 7-23, 1990
- Oller S., Oñate E., Oliver J. and Lubliner J., Finite element non-linear analysis of concrete structures using a plastic-damage model, Int. Journal of Engineering Fracture Mechanics, Vol. 35, No. 1/2/3, pp. 219-231, 1990 doi:10.1016/0013-7944(90)90200-Z
- Zienkiewicz O.C., Taylor R.L., Papadopoulos P. and Oñate E., Plate bending elements with discrete constraints: New triangular elements, Computers & Structures, Vol. 35 (4), pp. 505-522, 1990 doi:10.1016/0045-7949(90)90072-A
- Lubliner J., Oller S., Oliver J. and Oñate E., A plastic damage model for concrete, Int. Journal of Solids and Structures, Vol. 25, No. 3, pp. 299-326, 1989 doi:10.1016/0020-7683(89)90050-4
- Miquel J., Suárez B. and Oñate E., Dynamic analysis of structures using a Reissner-Mindlin finite strip formulation, Computers and Structures, Vol. 31, No. 6, pp. 957-975, 1989 doi:10.1016/0045-7949(89)90281-2
- Oñate E., Oller S., Oliver J. and Lubliner J., A constitutive model for cracking of concrete based on the incremental theory of plasticity, Engineering Computations, Vol. 5(4), pp. 309-319, 1988 doi:10.1108/eb023750
- Oñate E., Kleiber M. and Agelet de Saracibar C., Plastic flow of void containing metals. Applications to axisymmetric sheet metal forming problems, Int. Journal for Numerical Methods in Engineering, Vol. 25(1), pp. 227-251, 1988 doi:10.1002/nme.1620250118
- Dvorkin E., Oñate E. and Oliver J., On a non linear formulation for curved Timoshenko beam elements considering large displacement/rotation increments, Int. Journal for Numerical Methods in Engineering, Vol. 26, pp. 1597-1613, 1988 doi:10.1002/nme.1620260710
- Suárez B., Miquel J. and Oñate E., Free vibration analysis of plates, bridges and axisymmetric shells using a thick finite strip method, Engineering Computations, Vol. 5, No. 2, pp. 158-164, 1988 doi:10.1108/eb023734
- Oller S., Oliver J. Lubliner J. y Oñate E., Un modelo constitutivo de daño plástico para materiales friccionales. Parte II: Generalización para procesos con degradación de rigidez. Ejemplos, Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 4, No. 4, pp. 433-462, 1988
- Suárez B., Miquel J. y Oñate E., Análisis dinámico de estructuras utilizando una formulación de bandas finitas de Reissner-Mindlin, Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 14, No. 3, pp. 257-274, 1988
- Oller S., Oliver J., Lubliner J. y Oñate E., Un modelo constitutivo de daño plástico para materiales friccionales. Parte I: Variables fundamentales, Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 4, No. 4, pp. 397-431, 1988
- Alarcon E., Alonso E., Aubry D., Axelsson K., Oñate E. et al, Benchmarks for geotechnical modeling, Int. Journal for Numerical Methods in Engineering, Vol. 26 (11), pp. 2559-2568, 1988 doi:10.1002/nme.1620261113
- Agelet de Saracibar C. y Oñate E., Un modelo plástico no asociado para el análisis de localización en procesos de embutición de metales, Anales de Ingeniería Mecánica, Vol. 5(1), pp. 7-12, 1987
- Oliver J. and Oñate E., A total lagrangian formulation for the geometrically non linear analysis of structures using finite elements. Part II: archs, frames and axisymmetric shells, Int. Journal for Numerical Methods in Engineering, Vol. 23, pp. 253-274, 1986 doi:10.1002/nme.1620230209
- Oliver J. and Oñate E., A finite element formulation for the analysis of marine pipelines during laying operations, Int. Journal of Pipelines, Vol. 5, pp. 15-35, 1985
- Oliver J., Oñate E., Peraire J. y Chueca R., Análisis no lineal de tanques criogénicos bajo cargas térmicas, Hormigón y Acero, No. 155, pp.99-123, 1985
- Oliver J. and Oñate E., A total lagrangian formulation for the geometricaly non linear analysis of structures using finite elements. Part I: 3D shells, Int. Journal for Numerical Methods in Engineering, Vol. 20, pp. 2253-2281, 1984 doi:10.1002/nme.1620201208
- Oñate E. y Suárez B., Estudio de la distribución transitoria del gas en redes urbanas por el método de los elementos finitos, Anales de Ingeniería Mecánica, Año 2, No. 1, pp.59-68, 1984
- Oliver J. y Oñate E., Una formulación para el estudio por el método de los elementos finitos de la deformación de tuberías marinas durante su instalación, Revista de Obras Públicas, Vol. 130 (3218), pp. 747-763, 1983
- Oñate E. and Zienkiewicz O.C., A viscous shell formulation for the analysis of thin sheet metal forming, Int. Journal of Mechanical Science, Vol. 25, No. 5, pp. 305-335, 1983 doi:10.1016/0020-7403(83)90011-5
- Oñate E. and Suárez B., A comparison of the linear quadratic and cubic mindlin strip elements for the analysis of thick and thin plates, Computers and Structures, Vol. 17, No. 3, 1983 doi:10.1016/0045-7949(83)90134-7
- Oñate E. and Suárez B., A unified approach for the analysis of bridges, plates and axisymmetric shell structures using the linear Mindlin strip, Computers and Structures, Vol. 17, No. 3, pp. 427-439, 1983 doi:10.1016/0045-7949(83)90133-5
- Oñate E., Gaona, Oliver J. y Suárez B., Posibilidades de los ordenadores personales en el cálculo de estructuras por el método de los elementos finitos, Revista de Obras Públicas, Vol. 130 (3212), pp. 231-248, 1983
- Oliver J., Suárez B., Blanco E. y Oñate E., El laboratorio de ensayo de estructuras en modelo reducido de la Escuela de Ingenieros de Caminos de Barcelona, Hormigón y Acero, No. 145, 1982
- Oñate E., A comparison of Kirchhoff and Mindlin strips in the analysis of plate and bridge structures, Annals of the Polish Academy of Sciences, Tom XXIII, ZESZYT, Vol. 3, pp. 1196-220, 1981
- Zienkiewicz O.C., Oñate E., Heinrich J.C., A general formulation for the coupled thermal flow of metals using finite elements, Int. Journal for Numerical Methods in Engineering, Vol. 17, pp. 1497-1514, 1981 doi:10.1002/nme.1620171005
- Oñate E., La formulación del flujo viscoplástico y sus diversas aplicaciones prácticas por el método de elementos finitos, Revista de Obras Públicas, Febrero, 1980
- Zienkiewicz O.C., Jain P.C., Oñate E., Flow of solids during forming and extrusion: Some aspects of numerical solutions, Int. Journal of Solids and Structures, Vol. 14, pp. 15-38, 1978 doi:10.1016/0020-7683(78)90062-8
- Zienkiewicz O.C., Bauer J., Morgan K., Oñate E., A simple and efficient element for axisymmetric shells, Int. Journal for Numerical Methods in Engineering, Vol. 11, No. 10, pp. 1545-1558, 1977 doi:10.1002/nme.1620111006
- Middleton J., Oñate E., Diseño óptimo de vasijas de presión, utilizando el método de elementos finitos y un optimizador no lineal, Revista E.T.S.I.I.T., No. 11, 1977
- Oñate E., Análisis de puentes mediante el método de las bandas finitas, Hormigón y Acero, No. 124, 1977
- Jiménez S., Barbu L., Oñate E., Development of a unified fatigue constitutive model: from high to low cycle regim, Monografía Nº M194, CIMNE, 393 pp., Barcelona, España, February 2025
- Cornejo A., Oñate E., Zárate F., A fully Lagrangian formulation for fluid-structure interaction between free-surface flows and multi-fracturing solids, Monograph Nº- 192, CIMNE, 398 pp., Barcelona, España, January 2021
- Mataix V., Oñate E., Rossi R., Innovative mathematical and numerical models for studying the deformation of shells during industrial forming processes with the finite element method, Monograph Nº 190, CIMNE, 372 pp., Barcelona, España, September 2020
- Zorrilla R., Oñate E., Rossi R., Towards the virtual wind tunnel for civil engineering applications, Monograph Nº- 189, CIMNE, 213 pp., Barcelona, España, 2020
- Celigueta M.A., Oñate E., A particle finite element method for fluid-related problems in civil engineering, Monografía Nº M187, CIMNE, 279 pp., Barcelona, November 2019
- Iaconeta I., Oñate E., Larese A., Discrete-continuum hybrid modelling of flowing and static regimes, Monografía Nº 188, CIMNE, 191 pp., Barcelona, November 2019
- Casas G., Oñate E. and Rossi R., Numerical analysis of particulate flows with the finite element method, Monografía Nº M181, CIMNE, 326 pp., Barcelona, November 2018
- Cardoso Victor E., Oñate E., Botello S., Discrete Volume Method. A variational approach for brittle fracture, Monografía Nº M184, CIMNE, 116 pp., Barcelona, 2018
- de Pouplana I., Oñate E., Development of new computational methods for fluid-structure interaction analysis of multi-fractured media, Monografía Nº M177, CIMNE, 195 pp., Barcelona, January 2018
- Jou O., Oñate E., Celigueta M.A., Theoretical study about sea ice behaviour, analysis of floe-ice fractures and discrete element modelling for ship-ice interactions, Monografía Nº M179, CIMNE, 151 pp., Barcelona, 2018
- Salazar F., Oñate E., Toledo M.A., A machine learning based methodology for anomaly detection in dam behaviour, Monografía Nº M170, CIMNE, 250 pp, Barcelona, March 2017
- Irazábal J., and Oñate E., Numerical analysis of railway ballast behaviour using the Discrete Element Method, Monografía Nº M174, CIMNE, 218 pp.,Barcelona, 2017
- Rodríguez A., Oñate E. and Marcipar J., Design of an inflatable, modular and portable footbridge, Monografía Nº M175, CIMNE, 98 pp., Barcelona, 2017
- Cotela J., Oñate E., Rossi R., Applications of turbulence modeling in civil engineering, Monografía Nº M159, CIMNE, 203 pp., Barcelona, España, 2016
- Lafontaine N.M., Oñate E., Rossi R., Po C., Modelado de multifractura discreta en materiales quasi-fragiles, Monografía Nº M158, CIMNE, 360 pp., Barcelona, 2016
- Estruch C., Oñate E., Suárez B., Marcipar J., Nuevo concepto de puente de vigas hinchables ligero, modular y portátil, Monografía Nº M164, CIMNE, 162 pp., Barcelona, 2016
- Soudah E., Oñate E., Cervera M., Computational fluid dynamics indicators to improve cardiovascular pathologies diagnosis, Monografía Nº M167, CIMNE, 143 pp.,Barcelona, 2016
- Santasusana, M., Oñate, E., Carbonelle, J.M., Numerical techniques for non-linear analysis of structures combining discrete element and finite element methods, Monografía Nº M168, CIMNE, 260 pp, Barcelona, December 2016
- de Pouplana, I., Oñate E., An isotropic damage model for geomaterials in the Kratos framework, Monografía Nº M153, CIMNE, ISBN: 978-84-943307-8-0, 2015
- Franci, A., Oñate, E. and Carbonell, J,M., Unified Lagrangian formulation for fluid and solid mechanics, Fluid-structure interaction and coupled thermal problems using the PFEM, Monografía Nº M155, CIMNE, ISBN: 978-84-943928-8-7, 2015
- Ortega E., Oñate E., Idelsohn S., Development and applications of the finite point method t compressible aerodynamics problems, Monografía Nº M143, CIMNE, ISBN: 978-84-941686-7-3, Barcelona, 2014
- Coll A., Oñate E. and Dadvand P., Robust volume mesh generation for non-watertight geometries, Monografía Nº M146, CIMNE, ISBN: 978-84-942844-8-9, Barcelona, 2014
- Kamran K., Oñate E., Idelsohn S. and Rossi R., A compressible Lagrangian framework for the simulation of underwater implosion problems, Monografía Nº M150, CIMNE, ISBN: 978-84-943307-2-8, Barcelona, 2014
- Eijo A., Oñate E. and Oller S., Finite element modeling of delamination in advanced composite beams and plates using one and two dimensional finite elements based on the refined zigzag theory, Monografía Nº M149, CIMNE, ISBN: 978-84-943307-1-1, Barcelona, 2014
- Diego X.,Oñate E., Chiumenti M., On the theory of cell migration: Durotaxis and chemotaxis, Monografía Nº M144, CIMNE, ISBN: 978-84-941686-8-0, Barcelona, 2014
- Monteiro V., Oñate E. and Oller S., Computational model of the human urinary blader, Monografía Nº M148, CIMNE, Barcelona, pp. 195, ISBN: 978-84-943307-4-2, Barcelona, 2013
- Kouhi M, Oñate E., Bugeda G., A contribution to the finite element analysis of high-speed compressible flows and aerodynamic shape optimization, Monografía Nº M140, CIMNE, ISBN: 978-84-941686-2-8, Barcelona, 2013
- Nadukandi P., Oñate E. and García-Espinosa J., Stabilized finite element methods for convection-diffusion-reaction, Helmholtz and Stokes problems, Monografía Nº M130, CIMNE, ISBN: 978-84-940243-3-7, Barcelona, 2012
- Gavidia G., Soudah E. and Oñate E., Clasificadores basados en máquinas de soporte vertical para el diagnóstico y predicción de la enfermedad de Alzheimer, Monografía Nº M131, CIMNE, ISBN: 978-84-940243-4-4, Barcelona, 2012
- Labra C., Oñate E. and Rojek J., Advances in the development of the discrete element method for excavation processes, Monografía Nº M132, CIMNE, ISBN: 978-84-940243-5-1, Barcelona, 2012
- Larese A., Oñate E. and Rossi R., A coupled Eulerian-PFEM model for the simulation of overtopping in rockfill dams, Monografía Nº M133, CIMNE, ISBN: 978-84-940243-6-8, Barcelona, 2012
- De Mier M., Idelsohn S.R. and Oñate E., Numerical simulation of multi-fluid flows with the particle finite element method, Monografía Nº M115, CIMNE, ISBN: 978-84-96736-87-0, Barcelona, 2010
- Carbonell J.M., Oñate E. and Suárez B., Modeling of ground excavaton with the particle finite element method, Monografía Nº M116, CIMNE, ISBN: 978-84-96736-85-6, Barcelona, 2010
- Ryzhakov P., Oñate E., Rossi R. and Idelsohn S.R., Lagrangian FE methods for coupled problems in fluid mechanics, Monografía Nº M121, CIMNE, ISBN: 978-84-96736-97-9, Barcelona, 2010
- Di Capua D., Marí A. y Oñate E., Modelo higro-termo-mecánico para estructuras de hormigón armado expuestas al fuego, Monografía Nº M113, CIMNE, ISBN: 978-84-96736-61-0, Barcelona, 2009
- Soudah E., López R., Bordone M. and Oñate E., Decision support system for cardiovascular problems, Monografía Nº M108, CIMNE, ISBN: 978-84-96736-43-6, Barcelona, 2008
- Rastellini F., Oller S. y Oñate E., Modelización numérica de la no-linealidad constitutiva de laminados compuestos, Monografía Nº M100, CIMNE, ISBN: 978-84-96-736, Barcelona, 2007
- Morán A., Oñate E. y Miquel J., Formulaciones tangentes y secantes en análisis no lineal de vigas Cosserat, Monografía Nº M103, CIMNE, ISBN: 978-84-96736-286-9, Barcelona, 2007
- Valdés J. G., Oñate E. and Miquel J., Nonlinear analysis of orthotropic membrane and shell structures including fluid-structure interaction, Monografía Nº M107, CIMNE, ISBN: 978-84-96736-37-5, Barcelona, 2007
- Lynga H., Oñate E., A finite element method for solving the incompressible Navier-Stokes equations at low and high Reynolds numbers using finite calculus. Applications to fluid-structure interaction, Monografía Nº M104, CIMNE, ISBN: 978-84-96736-33-7, Barcelona, 2007
- Aubry R., Idelsohn S. R. and Oñate E., Incompressible Lagrangian fluid flow with thermal coupling, Monografía Nº M95, CIMNE, ISBN: 84-95999-92-7, Barcelona, 2006
- Oñate E., Piazzese J., Dolz J., Gómez M. and Bladé E., Decision support system for risk assessment and management of floods. Ramflood Project, Monografía Nº M92, CIMNE, ISBN: 84-95999-75-7, Barcelona, 2005
- Recarey C.A., Oñate E., Miquel J., Zárate F., Rojek J. y Burrel S., Estudio de estimación de parámetros constitutivos en el método de elementos discretos o de partículas, Monografía Nº M93, CIMNE, ISBN: 84-96736-05-9, Barcelona, 2005
- Perazzo F., Miquel Canet J. y Oñate E., Una metodología numérica de malla para la resolución de las emociones de elasticidad mediante el método de puntos finitos, Monografía Nº M81, CIMNE, ISBN: 84-95999-43-9, Barcelona, 2003
- Balsa-Canto E., Mora J., Banga J.R. y Oñate E., II International Workshop (AFOT). Information Technologies and Computing Techniques for the Agro-Food Sector, Monografía Nº M86, CIMNE, ISBN: 84-95999-46-3, Barcelona, 2003
- Rojek J., Oñate E., Zárate F. and Recarey C.A., Discrete Element Modelling of Rock Cutting Processes Interaction with Evaluation of Tool Wear, Monografía Nº M87, CIMNE, ISBN: 84-95999-44-7, Barcelona, 2003
- Roca P., Díaz C., González J.L., Marí A.R., Molins C., Oñate E. y Serrà I., Evaluación y rehabilitación estructural de edificios. Posibilidades de las técnicas numéricas y experimentales, Monografía Nº M65, CIMNE, ISBN: 84-89925-99-2, Barcelona, 2002
- Tschöpe H., Wriggers P. and Oñate E., Direct computation of instability points with inequality constraints using the finite element method, Monografía Nº M61, CIMNE, ISBN: 84-89925-81-X, Barcelona, 2001
- Car, E., Oller, S., Oñate, E., Tratamiento Numérico de los Materiales Compuestos, Monografía Nº M57, CIMNE, ISBN: 84-89925-66-6, Barcelona, 2000
- García J., Oñate E. y Sierra H., Un método de elmentos finitos para análisis hidrodinámico de estructuras navales, Monografía Nº M59, CIMNE, ISBN: 84-89925-75-5, Barcelona, 2000
- Ribo R., Oñate E., Bugeda G., Desarrollo de un sistema integrado para tratamiento de geometría, generación de malla y datos para el análisis por el método de los elementos finitos, Monografía Nº M56, CIMNE, ISBN: 84-89925-67-4, Barcelona, 2000
- Estupiñán J., Oñate E. y Suárez B., Métodos evolutivos en la optimización topológica, Monografía Nº M47, CIMNE, ISBN: 84-89925-35-6, Barcelona, 1999
- Jovicevic J. and Oñate E., Analysis of beams and shells using a rotation - free finite element - finite volume formulation, Monografía Nº M43, CIMNE, ISBN: 84-89925-36-4, Barcelona, 1999
- López J., Oller S. y Oñate E., Cálculo del comportamiento de la mampostería mediante elementos finitos, Monografía Nº M46, CIMNE, ISBN: 84-89925-29-1, Barcelona, 1998
- Matias Silva W.T. y Oñate E., El método de desplazamiento crítico para la predicción de puntos límite y de bifurcación en estructuras, Monografía Nº M35, CIMNE, ISBN: 84-87867-89-8, Barcelona, 1997
- Cendoya P., Oñate E. y Miquel J., Nuevos elementos finitos para el análisis dinámico elastoplástico no lineal de estructuras laminares, Monografía Nº M36, CIMNE, ISBN: 84-87867-90-1, Barcelona, 1997
- Hanganu, A.D., Barbat A.H. y Oñate E., Métodología de evaluación del deterioro en estructuras de hormigón armado, Monografía Nº M39, CIMNE, ISBN: 84-87867-01-1, Barcelona,1997
- Fischer T. and Oñate E., A Contribution to Adaptive Numerical Solution of Compressible Flow Problems, Monografía Nº M34, CIMNE, ISBN: 84-87867-85-5, Barcelona, 1996
- Hanganu, A.D., Barbat A.H., Oller S. y Oñate E., Simulación del daño sísmico en edificios de hormigón armado, Monografía Nº IS04, CIMNE, ISBN: 84-87867-40-5, Barcelona, 1994
- Miquel J., Oñate E., García Garino C., Botello S., Flores F. and Rojek J., Análisis de problemas de choque e impacto entre sólidos deformables por el método de los elementos finitos, Monografía Nº M25, CIMNE, ISBN: 84-87867-51-0, Barcelona, 1994
- Oñate E., Numerical simulation of sheet forming processes using finite element methods, Monografía Nº M23, CIMNE, ISBN: 84-87867-27-8, Barcelona, 1993
- Miquel J., Oñate E., Buil J. y Herrero E., Análisis dinámico de presas, Monografía Nº M05, CIMNE, ISBN: 84-404-8715-0, Barcelona, 1991
- Miquel J., Bugeda G. y Oñate E., Simulación numérica de la aerodinámica de vehículos, Monografía Nº M02, CIMNE, ISBN: 84-404-8685-5, Barcelona, 1991
- Oñate E., Oller S., Botello S. y Miquel J., Métodos avanzados de cálculo de estructuras de materiales compuestos, Monografía Nº M03, CIMNE, ISBN: 84-404-8684-7, Barcelona, 1991
- Miquel J., Botello S., Buil J. y Oñate E., La presa bóveda de Talvacchia. Análisis estático y dinámico, Monografía Nº M06, CIMNE, ISBN: 84-87867-03-0, Barcelona, 1991
- Agelet de Saracibar C. y Oñate E., Modelado numérico de procesos de conformado de láminas metálicas, Monografía Nº M08, CIMNE, ISBN: 84-87867-07-3, Barcelona, 1991
- Oñate E., Lectures on non linear analysis of concrete shells, Monografía Nº M07, CIMNE, ISBN: 84-87867-06-5, Barcelona, 1991
- Oñate E., Comparación entre las formulaciones de la banda finita con y sin inclusión de la deformación por cortante para análisis de puentes, Monografía del Instituto Torroja, CSIC, 1980
- García-Espinosa J., Oñate E., Serván B., Celigueta M.A., Latorre S., Colom-Cobb J., Development of New Lagrangian Computational Methods for Ice-Ship Interaction Problems: NICESHIP Project, In: Diez P., Neittaanmäki P., Periaux J., Tuovinen T., Pons-Prats J. (eds) Computation and Big Data for Transport. Computational Methods in Applied Sciences, Vol 54, pp.121-153, Springer, Cham, 2020
- Oñate E., F. Zárate, M.A. Celigueta, J.M. González, J. Miquel, J.M. Carbonell, F. Arrufat, S. Latorre, M. Santasusana, Advances in the DEM and coupled DEM and FEM techniques in non linear solid mechanics, In: Oñate E., Peric D., de Souza Neto E., Chiumenti M. (eds) Advances in Computational Plasticity. Computational Methods in Applied Sciences, Vol. 46, pp. 309-335, Springer 2018
- Idelsohn S. R., Oñate E. and Becker P., Particle methods in computational fluid dynamics, Encyclopedia of Computational Mechanics. Second Edition, E. Stein, R. de Borst and T. J. R. Hughes (Eds.), Chichester, UK, Wiley&Sons, pp. 1-41, 2018
- Pons-Prats, J., Bugeda, G., Zarate, F., Oñate, E., Periaux, J., Applying multi-objective robust design optimization procedure to the route planning of a commercial aircraft, In: Diez P., Neittaanmäki P., Periaux J., Tuovinen T., Bräysy O. (eds) Computational Methods and Models for Transport. Computational Methods in Applied Sciences, Vol. 45, pp. 147-167, 2018
- Oñate E., García J. and Idelsohn S.R., Serván-Camas B., Ship Hydrodynamics, Encyclopedia of Computational Mechanics Second Edition, E. Stein, R. de Borst and T. J. R. Hughes (Eds.), Chichester, UK, Wiley&Sons, Vol. 3 (2), pp. 1-46, 2018
- Mataix, V., Rossi, R., Oñate, E., Flores, F.G., Advanced solid elements for sheet metal forming simulation, Journal of Physics: Conference Series, Cesar de Sa J.M.A,Neto E.S.,Cardoso R.P.R.,Adetoro O.B. (eds.), Vol. 734, (3), pp. 032128, 2016
- Larese A., Rossi R., Oñate E., Simulation of the beginning of failure in rockfill dams caused by overtopping, A: Dam protections against overtopping and accidental leakage. CRC Press Taylor & Francis Group, pp. 111-117, 2015 doi:10.1201/b18292
- Oñate E., Franci A. and Carbonell J.M., A particle finite element method (PFEM) for coupled thermal analysis of quasi and fully incompressible flows and fluid-structure interaction problems, Numerical Simulations of Coupled Problems in Engineering, pp. 129-156, S. R. Idelsohn (Ed.), Springer, 2014
- Oñate E., Bellomo F.J., Monteiro V., Oller S. and Nallim L.G., Characterization of mechanical properties of biological tissue – Application to the FEM analysis of the urinary bladder, Multiscale Simulations and Mechanics of Biological Materials, S. Li et al. (Eds), Wiley, 2014
- Oñate E., Idelsohn S., Celigueta M.A. and Suárez B., The particle finite element method (PFEM). An effective numerical technique for solving marine, naval and harbour engineering problems, Marine IV Int. Conference on Computational Methods in Marine Engineering. Selected papers, L. Eça, E. Oñate, J. García-Espinosa, T. Kvamsdal and P. Bergan (Eds.), pp. 65-81, Springer, 2013
- Oñate E., Idelsohn S.R., Celigueta M.A., Salazar F. and Suárez B., The particle finite element method. An effective numerical technique for solving fluid-soil-structure interaction problems, Issues on Mechanical and Civil Engineering. A Symposium to honour Prof. Enrique Alarcón, M. Doblaré, Ja. Domínguez, Jo. Domínguez, A. Fraile, F. García, S. Gómez, A. Martín, F. París (Eds.), 2012
- Oñate, E., Idelsohn, S.R., Celigueta, M.A., Rossi, R., Latorre, S., Possibilities of the Particle Finite Element Method in Computational Mechanics, In: Kuczma M., Wilmanski K. (eds), Computer Methods in Mechanics. Advanced Structured Materials, vol 1., chapter 15, pp. 271-310, 2012, Springer, Berlin doi:10.1007/978-3-642-05241-5_15
- Oñate E., Celigueta M.A., Idelsohn S., Salazar F. and Suárez B., Fluid-soil-structure interaction analysis with the particle finite element method, Bytes and Science, G. Zavarise and D. Boso (Eds.), pp. 119 - 130, CIMNE, Barcelona Spain, 2012
- Idelsohn S.R., Mier-Torrecilla M., Marti J. and Oñate E., The particle finite element method for multi-fluid flows, Particle-Based Methods, Computational Methods in Applied Sciences, Springer, E. Oñate and R. Owen (Eds.), Vol. 25, pp. 135-158, 2011
- Oñate E., Idelsohn S.R., Celigueta M.A., Rossi R., Marti J., Carbonell J.M., Ryzhakov P. and Suárez B., Advances in the particle finite element method (PFEM) for solving coupled problems in engineering, Particle-Based Methods, Computational Methods in Applied Sciences, Springer, E. Oñate and R. Owen (Eds.), Vol. 25, pp. 1-48, 2011
- Lee D.S., Periaux J., Srinivas K., Gonzalez L.F., Qin N. and Oñate E., Shock control bump design optimization on natural laminar aerofoil, Computational Fluid Dynamics Review 2010, Part 9, 253-259, Edited by M M Hafez, K Oshima & Dochan Kwak, 2010
- Rudenick P., Bordone M., Bijnens B., Soudah E., Oñate E., Garcia-Dorado D. and Evangelista A., A multi-method approach towards understanding the pathophysiology of aortic dissections – the complementary role of in-silico, in-vitro and in-vivo information, Book Series: Lecture Notes in Computer Science, Camara O., Pop M., Rhode K. et al. (Eds.), Vol. 6364, pp. 114-123, 2010
- Rojek J., Oñate E., Labra C., Kargl H. and Akerman J., Optimizing rock cutting through computer simulation, Technology Innovation in Underground Construction (TUNCONSTRUCT), G. Beer (Ed.), 2010
- Oñate, E., Idelsohn, S.R., Celigueta, M.A., Rossi, R., Latorre, S., Possibilities of the Particle Finite Element, M. Kuczma, K. Wilmanski (Eds.): Computer Methods in Mechanics, Chapter 15, pp. 271–310., Springer-Verlag Berlin Heidelberg, 2010
- Idelsohn S.R., Oñate E., Rossi R., Marti J. and Del Pin F., New computational challenges in fluid-structure interactions problems, ECCOMAS Multidisciplinary Jubilee Symposium, J. Eberhardsteiner, Ch. Hellmich, H. Mang and J. Périaux (Eds.), 2009
- Löhner R., Yang Ch. and Oñate E., Simulation of structural response to violent-free surface flows, Numerical Modeling of Coupled Phenomena in Science and Engineering, M.C. Suárez Arriaga, J. Bundschuh, F.J. Dominguez-Mota (Eds.), 2008
- Oñate E., Flores F.G. and Marcipar J., Membrane Structures Formed by Low Pressure Inflatable Tubes. New Analysis Methods and Recent Constructions, Textile Composites and Inflatable Structures, E. Oñate and B. Kröplin (eds.), pp. 163-196, 2008
- Oñate E., Flores F. and Neamtu L., Enhanced rotation-free basic shell triangle, Applications to sheet metal forming, Computational Plasticity, E. Oñate and R. Owen (Eds.), pp. 239-265, 2007
- Idelsohn S. R., Oñate E. and Marti J., A unified symmetrical formulation for interactions between elastic solids and incompressible fluids, Variational Formulations in Mechanics: Theory and Applications, E. Taroco, E.A. de Souza Neto and A. A. Novotny (Eds.), pp. 163-182, 2007
- Valls A., García J. and Oñate E., LES Turbulence models. Relation with stabilized numerical methods, Models, Experiments and Computation in Turbulence, R. Castilla, E. Oñate, J. M. Redondo (Eds.), pp. 17-64, 2007
- Oñate E., Suárez B. y Miquel J., Posibilidades de los métodos numéricos en obras subterráneas, Avances en Mecánica de Medios Continuos. Simposium en honor al Profesor J. A. Garrido García, E. Alarcón, A. Foces, F. París (Eds.), pp. 195-210, 2007
- López R. and Oñate E., A variational formulation for the multilayer perceptron, ICANN, S. Kollias et al (Eds.), ICANN 2006, Part I, LNCS 4131, pp. 19-168, Germany.
- Oñate E., Idelsohn S.R., Celigueta M. A. and Rossi R., Advances in the particle finite element method for fluid-structure interaction problems, In Computational Mechanics: Solids, Structures and Coupled Problems, Mota Soares C.A. et al. (eds), Vol. 6, pp. 41-62, 2006 doi:10.1007/1-4020-5370-3_3
- Oñate E., Idelsohn S.R. and Celigueta M.A., Lagrangian formulation for fluid-structure interaction problems using the particle finite element method, Verification and Validation Methods for Challenging Multiphysics Problems, CIMNE, pp. 125-150, 2006
- Rossi R., Vitaliani R. and Oñate E., FE analysis of membrane systems including wrinkling and coupling, Recent Advances in Textile Membranes and Inflatable Structures, Springer Verlag, pp. 89-108, 2005
- Flores F. and Oñate E., Applications of a rotation-free triangular element for finite strain analysis of thin shells and membranes, Recent Advances in Textile Membranes and Inflatable Structures, Springer Verlag, pp. 69 - 88, 2005
- Taylor R.L., Oñate E. and Ubach P.-A., Finite element analysis of membrane structures, Recent Advances in Textile Membranes and Inflatable Structures, Springer Verlag, pp. 47-68, 2005
- Marcipar J., Oñate E. and Miquel J., Experiences in the design analysis and construction of low pressure inflatable structures, Recent Advances in Textile Membranes and Inflatable Structures, Springer Verlag, pp. 241 - 257, 2005
- Oñate E., Stabilization via finite element computations, Finite Element Methods: 1970s and Beyond, Franca L.P., Tezduyar T.E. and Masud A. (Eds.), CIMNE, Barcelona, Spain 2004
- Oñate E., García J. and Idelsohn S.R., Ship hydrodynamics, Encyclopedia of Computational Mechanics, E. Stein, R. de Borst and T.J.R. Hughes (Eds.), John Wiley & Sons Ltd, Vol. 3, Chapter 18, pp. 579 - 607, 2004
- Oñate E., Idelsohn S.R. and Del Pin F., Lagrangian formulation for incompressible fluids using finite calculus and the finite element method, Numerical Methods for Scientific Computing Variational Problems and Applications, Kuznetsov Y., Neittanmaki P. and Pironneau O. (Eds.),CIMNE, Barcelona, Spain 2003
- Oñate E., García J., Bugeda G. and Idelsohn S.R., A general stabilized formulation for incompressible fluid flow using finite calculus and the finite element method, Fluid Dynamics and Aeronautics New Challenges, Périaux J., Champion M., Gagnepain J.-J., Pironneau O., Stoufflet B. and Thomas Ph.(Eds.), CIMNE, Barcelona, Spain 2003
- Car E., Oller S. y Oñate E., Materiales compuestos - Simulación del comportamiento anisótropo, Análisis y Cálculo de Estructuras de Materiales Compuestos, Oller S. (Ed.), pp. 95-144, CIMNE, Barcelona, Spain 2002
- Oñate E. and García J., A finite element method for fluid-structure interaction with surface waves, Trends in Computational Structural Mechanics, W. A. Wall, K.-U. Bletzinger and K. Schweizerhof (Eds.), CIMNE, Barcelona, Spain 2001
- Oñate E., Sacco C. and Idelsohn S., Meshless analysis of incompressible flows using the finite point method, Innovative Tools for Scientific Computation in Aeronautical Engineering, J. Periaux, P. Joly, O. Pironneau and E. Oñate (Eds.), pp. 208-232, CIMNE, Barcelona, Spain 2001
- Chiandussi G., Bugeda G. and Oñate E., A simple method for automatic adaption of finite element meshes to changes in the boundary shape, Innovative Tools for Scientific Computation in Aeronautical Engineering, J. Periaux, P. Joly, O. Pironneau and E. Oñate (Eds.), pp. 149-167, CIMNE, Barcelona, Spain 2001
- Oñate E. and Manzan M., Stabilization techniques for finite element analysis of convection-diffusion problems, Convection Heat Transfer, B. Sundén and G. Comini (Eds.), WIT Press, Southampton, United Kingdom, 2000
- Zárate F., Hurtado J.E. and Oñate E., Stochastic analysis of an impact problem, Stochastic Analysis of Multivariate Systems in Computational Mechanics and Engineering, I. Doltsinis (Ed.), CIMNE, Barcelona, Spain, 1999
- Oñate E., García J. and Idelsohn S., An alpha-adaptive approach for stabilized finite element solution of advective-diffusive problems with sharp gradients, New Advances in Adaptive Computational Methods in Mechanics, P. Ladeveze and J.T. Oden (Eds.), Elsevier, 1998
- Roca P., Pellegrini L., Oñate E., and Hanganu A., Analysis of the structure of gothic cathedrals. Application to Barcelona cathedral, Structural Analysis of Historical Constructions II, P. Roca, J.L. González, E. Oñate and P. B. Lourenço(Eds.), CIMNE, Barcelona, Spain, 1998
- Oñate E., Possibilities of parallel computing in the finite element analysis of industrial forming processes, Vector and Parallel Processing - VECPAR´96, Lecture Notes in Computer Science, Vol. 1215, pp. 258-294, Springer, 1997 doi:10.1007/3-540-62828-2_125
- Oñate E. and Rojek J., Prediction of elastic springback deffects in sheet stamping processes using finite element methods, Advanced Methods in Materials Processing Defects, Elsevier, 1997
- Duffett G.A., Cendoya P., Rojek J. and Oñate E., Efficient computational aspects for analyses of sheet stamping problems, Recent Developments in Computational and Applied Mechanics. A Book in Honour of John B. Martin, B. D. Reddy (Ed.), CIMNE, 1997
- Oñate E., Hanganu A., Barbat A., Oller S., Vitaliani R., Saetta A. and Scotta R., Structural analysis and durability assesment of historical constructions using a finite element damage model, Structural Analysis of Historical Constructions I, P. Roca, J.L. González, A.R. Marí and E. Oñate (Eds.), CIMNE, Barcelona, Spain, 1997
- Oñate E. and Matias W.T., Enhanced prediction of structural instability points using a critical displacement method, Advances in Finite Element Technology, N.-E. Wiberg (Ed.), CIMNE, Barcelona, 1995
- Oñate E., Reliability analysis of concrete structures. Numerical and experimental studies, Evoluzione nella Sperimentazione per le Costruzioni, CIAS, Merano, April 1994
- Oñate E., A review of some finite element families for thick and thin plate and shell analysis, Recent Developments in Finite Element Analysis, Hughes J., Oñate E. and Zienkiewicz O. (Eds.), CIMNE, Barcelona 1994
- Bugeda G. and Oñate E., Aerodynamic shape optimization, Optimum Shape Design in Aeronautics, J. Periaux et al (Eds.), Springer Verlag, 1993
- Zienkiewicz O. C. and Oñate E., Finite elements versus finite volumes. Is there really a choice?, Non Linear Computational Mechanics. State of the Art, P. Wriggers y R. Wagner (Eds.), Springer Verlag, 1992
- Oñate E. and Agelet de Saracibar C., Numerical modelling of sheet metal forming problems, Numerical Modelling of Material Deformations Processes, C. Sturgess et al (Eds.), Springer Verlag, London, 1991
- Oñate E. and Castro J., Adaptive refinement techniques for structural problems, The Finite Element Method in the 1990's, E. Oñate et al (Eds.), CIMNE/Springer Verlag, 1990
- Oñate E., Suárez B. and Hinton E., Finite Streifenmethode für Mindlinsche Platten und axialsymmetrische Schalen, Finite Elemente Programme für Platten und Schalen, Springer-Verlag, Berlin, Germany, 1990
- Oliver J. and Oñate E., A finite element formulation for the geometrically non linear analysis of shells using a total lagrangian approach, Computational Methods for Non Linear Problems, C. Taylor (Ed.) Pineridge Press, pp. 29-55, 1988
- Oñate E. and Agelet de Saracibar C., Finite element analysis of sheet metal forming problems using a viscous voided shell formulation, Modelling of Metal Forming Processes, J.L. Chenot y E. Oñate (Eds.), Kluwer Academic Publisher, pp. 163-178, 1988
- Oliver J., Oller S. y Oñate E., Fractura elastoplástica: Modelos elastoplásticos para la simulación numérica de procesos de fractura, Métodos Numéricos Aplicados a la Mecánica de Fractura, J. Oliver et al (Eds.), CIMNE, Barcelona, pp. 27-60, 1988
- Oñate E., Métodos de cálculo y simulación en CAD. Diseño y simulación por computador, Boixareu Eds., Barcelona, 1986
- Oñate E. y Miquel J., Efectos de los terremotos en las construcciones, Riesgos Naturales en Ingeniería, E. Alonso et al (Eds.), Ediciones UPC, 1986
- Oñate E. and Oliver J., Lagrangian formulations for the geometricaly non-linear analysis of shell and plate structures using finite elements, Finite Element Methods for Plates and Shells, E. Hinton y R. Owen (Eds.), Pineridge Press, 1986
- Oñate E. and Suárez B., The finite strip method for the analysis of plate, bridge and axisymmetric shell structures, Finite Element Software for Plates and Shells, E. Hinton y R. Owen (Eds.), Pineridge Press, 1986
- Oñate E., Suárez B., Miquel J. and Hinton E., Free vibration analysis of bridge, plate and axisymmetric shell structures by the finite strip method, Finite Element Software for Dynamic Analysis of Plates and Shells, E. Hinton (Ed.), Pineridge Press, 1986
- Oñate E. and Pérez Lama R., Possibilities of the finite element viscous shell approach in the analysis of thin sheet forming, Finite Element Applications to Metal Forming Processes, A.E. Tekaya y A. Lange (Eds.) Springer Verlag, Berlin, 1986
- Oñate E. and Oliver J., A finite element formulation for the geometrically non linear analysis of shells, Finite element methods for plate and shell structures, T.J.R. Hughes, E. Hinton (Ed.) Pineridge Press, Vol. 2: Formulations and Algorithms, pp. 83-101, 1986
- Oliver J. and Oñate E., A total lagrangian formulation for the geometrically non-linear analysis of shells, Flexible Shells, E.L. Axelrad, F.A. Emmerlind (Eds.), Berlín, 1984
- Oñate E., Suárez B. and Hinton E., Mindlin finite strip and axisymmetric finite element shell analysis, Finite Elements Software for Plates and Shells, Hinton E. y Owen D.R.J. (Eds.), Pineridge Press, 1984
- Computational Plasticity XIV. Fundamentals and Applications, E. Oñate, D.R.J. Owen, D. Peić and M. Chiumenti (Eds.), CIMNE, Barcelona, 2017
- Dam protections against overtopping and accidental leakage, M.A. Toledo, R. Morán and E. Oñate (Eds.), CRC Press, Taylor and Francis Group, A Balkema book, 2015
- Computational Plasticity XII. Fundamentals and Applications, E. Oñate, D.R.J. Owen, D. Peric and B. Suárez (Eds.), CIMNE, Barcelona, 2013
- Particle Based Methods III. Fundamentals and applications, M. Bischoff, E. Ramm, E. Onate, R. Owen, P. Wriggers (Eds.), CIMNE, Barcelona, 2013
- Structural membranes : VI International Conference on Textile Composites and Inflatable Structures : 9-11 October 2013, Munich, K. U. Bletzinger, B. Kroplin, & E. Onate (Eds.), CIMNE, Barcelona, 2013
- Computational methods for coupled problems in science an engineering : V International Conference celebrated the 60th birthday of Eugenio Oñate : held on 17-19 June 2013, Santa Eulalia, Ibiza, Spain, S. Idelsohn, M. Papadrakakis and B. Schrefler (Eds.), CIMNE, Barcelona, 2013
- MARINE 2011, IV International Conference on Computational Methods in Marine Engineering: Selected Papers (Computational Methods in Applied Sciences Book 29), L. Eça, E. Oñate, J. García-Espinosa, T. Kvamsdal and P. Bergan (Eds.), Springer, 2013
- Particle-Based Methods. Fundamentals and Applications, E. Oñate, D.R.J. Owen (Eds.), 2011
- Fundamentals and applications: II International Conference on Particle-Based Methods : 26-28 October 2011, Barcelona, E. Oñate, D.R.J. Owen (Eds.), 2011
- Computational Methods for Coupled Problems in Science and Engineering IV, M. Papadrakkais, E. Oñate, B. Schrefler (Eds.), 2011
- Structural Membranes 2011 V International Conference on Textile Composites and Inflatable Structures, E. Oñate, B. Kröplin, K.-U. Bletzinger (Eds.), 2011
- Computational Plasticity XI. Fundamentals and Applications, E. Oñate, D.R.J. Owen, D. Peric, B. Suárez (Eds.), 2011
- Structural analysis with the finite element methods : linear statics; Vol. 1: Basis and solids, E. Oñate (Ed.), Springer, Barcelona, 2009
- Computational Plasticity X. Fundamentals and Applications, E. Oñate, D.R.J. Owen and B. Suárez (Eds.), CIMNE, Barcelona 2009
- Computational Methods in Marine Engineering III, T. Kvamsdal, B. Pettersen, P. Bergan, E. Oñate and J. García (Eds.), CIMNE, Barcelona 2009
- Textile Composites and Inflatable Structures IV, E. Oñate and B. Kröplin (Eds.), CIMNE, Barcelona 2009
- Computational Methods for Coupled Problems in Science and Engineering III, B. Schrefler, E. Oñate and M. Papadrakakis (Eds.), CIMNE, Barcelona 2009
- Textile Composites and Inflatable Structures II, E. Oñate and B. Kröplin (Eds.), Springer, VIII, 272p., 2008
- Computational Methods for Coupled Problems in Science and Engineering II (COUPLED 2007), E. Oñate, M. Papadrakakis (Eds.), CIMNE, Barcelona, 2007
- Computational Methods in Marine Engineering (MARINE 2007), E. Oñate, J. García, P. Bergan and T. Kvamsdal (Eds.), CIMNE, Barcelona, 2007
- Models, Experiments and Computation in Turbulence, R. Castilla, E. Oñate, J. M. Redondo (Eds.), CIMNE, Barcelona, 2007
- Textile Composites and Inflatable Structures III, E. Oñate and B. Kröplin (Eds.), CIMNE, Barcelona, 2007
- Computational Plasticity IX: Fundamentals and Applications, E. Oñate, D.R.J. Owen, B. Suárez (Eds.), CIMNE, Barcelona, 2 vol., 986 p., 2007
- Computational Methods in Marine Engineering (MARINE 2005), E. Oñate, J. García and T. Kvamsdal (Eds.), CIMNE, Oslo, 27-29 June, 2005
- Textile Composites and Inflatable Structures, E. Oñate and B. Kröplin (Eds.), Springer, 2005
- Computational Methods for Coupled Problems in Science and Engineering (COUPLED 2005), M. Papadrakakis, E. Oñate and B. Schrefler (eds.), CIMNE, Barcelona 2005
- Computational plasticity VIII: Fundamentals and Applications, E. Oñate, D.R.J. Owen, B. Suárez (Eds.), CIMNE, Barcelona, 2 vol., 2005
- European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2004), P. Neittaanmäki, T. Rossi, S. Korotov, E. Oñate, J. Periaux and D. Knörzer (Eds.), Jyväskylä, 24 - 28 July 2004
- Textile Composites and Inflatable Structures (Structural Membranes 2003), E. Oñate and B. Kröplin (Eds.), Barcelona, España, 30 June - 3 July 2003
- Seventh International Conference on Computational Plasticity (COMPLAS VII), D.R.J. Owen, E. Oñate and B. Suárez (Eds.), CIMNE, Barcelona, España, 7 - 10 Abril 2003
- Actas del II Congreso Internacional de Métodos Numéricos en Ingeniería y Ciencias Aplicadas, E. Oñate, F. Zárate, G. Ayala. S. Botello, M.A. Moreles (Eds.), CIMNE, Barcelona, Spain 2002
- Innovative Tools for Scientific Computation in Aeronautical Engineering, J. Periaux, O. Pironneau, P. Joly and E. Oñate (Eds.), CIMNE, Barcelona, Spain, May 2001
- Métodos Numéricos en Ciencias Sociales, E. Oñate, F. García-Sicilia y L. Ramallo (Eds.), CIMNE, Barcelona, 491 pp., 20-21 noviembre 2000
- Computational Methods in Applied Science and Engineering, E. Oñate et al (Eds.), CD-Rom, Eccomas, Barcelona, Spain, 11 - 14 September 2000
- Structural Analysis of Historical Constructions II. Possibilities of numerical and experimental techniques, Roca P., González J.L., Oñate E. and Lourenço P.B. (Eds.), 354 pp., CIMNE, Barcelona, Spain, November 1998
- Computational Plasticity: Fundamentals and Applications, Owen D.R.J., Oñate E. and Hinton E. (Eds.), 2 Volumes, 2300 pp., CIMNE, Barcelona, Spain, April 1997
- Computational Methods in Applied Sciences'96, J.A. Désidéri, C. Hirsch, P. Le Tallec, E. Oñate, M. Pandolfi, J. Périaux and E. Stein (Eds.), John Wiley & Sons, 1996
- Numerical Methods in Engineering'96, J.A. Désidéri, P. Le Tallec, E. Oñate, J. Périaux and E. Stein (Eds.), John Wiley & Sons, 1996
- Structural Analysis of Historical Constructions I. Possibilities of Numerical and Experimental Techniques, Roca P., González J.L., Marí A.R. and Oñate E. (Eds.), 300 pp., CIMNE, Barcelona, 1996
- Computational Plasticity, Owen D.R.J., Oñate E. and Hinton E. (Eds.), CIMNE/Pineridge Press, 1995
- Recent Developments in Finite Element Analysis, Hughes T., Oñate E., and Zienkiewicz O.C. (Eds.), 317 pp., CIMNE, Barcelona, 1994
- Finite Element in Fluids, Morgan K., Oñate E., Periaux J., Peraire J. and Zienkiewicz O.C. (Eds.), CIMNE/Pineridge Press, 1993
- Computational Plasticity, Owen D.R.J., Hinton E. and Oñate E. (Eds.), CIMNE/Pineridge Press, 1992
- Numerical Methods in Engineering and Applied Sciences, Alder H., Heinrich J. C., Lavanchy S., Oñate E., and Suárez B. (Eds.), CIMNE, Barcelona, 1992
- Parallel Computing and Transputer Applications, Valero M., Oñate E., Jane M., Suárez B. and Larriba J.L. (Eds.), CIMNE, IOS Press, 1992
- Computational Methods in Applied Sciences, Hirsch Ch., Periaux J. and Oñate E. (Eds.), Elservier, 1992
- Numerical Methods in Engineering, Hirsch Ch., Zienkiewicz O.C. and Oñate E. (Eds.), Elservier, 1992
- The Finite Element Method in the 1990s. A book dedicated to O. C. Zienkiewicz, Oñate E., Periaux J. and Samuelsson A. (Eds.), CIMNE-Springer Verlag, 1991
- Computer Aided Training in Science and Technology, Oñate E., Suárez B., Owen D.R.J., Schrefler B., Kröplin B. and Kleiber M. (Eds.), CIMNE/Pineridge Press, 1990
- Computational Mechanics of Nonlinear Response of Shells, Krätzig W.B. and Oñate E., (Eds.), Springer Verlag, 1990
- Computational Plasticity. Models, Software and Applications, Owen D.R.J., Hinton E. and Oñate E. (Eds.), Pineridge Press, 1989
- Métodos Numéricos Aplicados a la Mecánica de Fractura, Oliver J., Elices M., Oñate E. y Astiz M.A. (Eds.), CIMNE, Barcelona, 1988
- Modelling of Metal Forming Processes, Chenot J.L. and Oñate E. (Eds.), Kluwer Academic Publishers, 1988
- Computational Plasticity, Models, Software and Applications, Owen D.R.J., Hinton E. and Oñate E. (Eds.), Pineridge Press, 1987
- Aplicaciones del Método de los Elementos Finitos en Ingeniería. Vol. I: Cálculo de Estructuras, Oliver J., Casteleiro M. y Oñate E. (Eds.), Ediciones UPC, Barcelona, 1986
- Aplicaciones de los Elementos Finitos en Estructuras. Vol. II: Ingeniería Geotécnica, Alonso E., Gens A. y Oñate E. (Eds.), Ediciones UPC, Barcelona, 1986
- Aplicaciones del Método de los Elementos Finitos en Ingeniería. Vol. I: Análisis de Estructuras, Oñate E., Suárez B. y Miquel J. (Eds.), Ediciones UPC, Barcelona, 1986
- Aplicaciones del Método de los Elementos Finitos en Ingeniería. Vol. III: Diseño por Ordenador, Oliver J., Casteleiro M. y Oñate E. (Eds.), Ediciones UPC, Barcelona, 1986
- Aplicaciones del Método de los Elementos Finitos en Ingeniería, Oñate E., Alonso E. y Casteleiro M. (Eds.), Ediciones UPC, Barcelona, 1982